-
Outdoor sensor
Outdoor sensor is excellent idea and a LCD wireless main panel tablet with all information on it , each room outdoor information and online weather from met office. Including usage of gas
-
1,0 degree isotherms in graphs (now 1,5 degree)
Currently in the temperature graphs the horizontal isotherm lines are spaced 1,5 degree Celsius apart. This makes the reading very uneasy and awkward for the untrained observer. Can you please set them 1,0 degree apart?
-
Allow a range of temperatures for a schedule (e.g. "comfort enough")
Add an ability to define temperature in a schedule as an acceptable range. E.g. in the morning heat to 20C if it's lower than 19C. This could be useful in many scenarios. For example, your room is already at 19.5C, and the schedule says 20C. There's no need to run the boiler to heat it for 0.5C more. Especially if it's a…
-
Child lock for Airco controllers
Add a feature to the smart ac controllers just like child lock on the thermostats. Our help in the household sometimes trigger the smart ac controller when we aren’t home and this enables the airco controllers. Currently I configured the tado app to revert any manual input after 1 minute, but with a feature similar to…
-
Alarms when temperature exceed setting
My daughter is away for a full academic year abroad. I did set temperature to 15 deg c close the doors and forget about it….. a few week later my wife went into her room and discovered the temperature at 35.7 deg C! what not having an alarm alerting dot this? thank you
-
Boiler modulation + zone valve control
I would like the option to use my extension kit to control the boiler via opentherm, but still have my wired thermostats click over when that sensor calls for demand so that I can use it for my zone valves. Really don’t understand why this isn’t an option, many home in the UK have zone valves meaning boiler modulation…
-
Window open notification
Window open notification could tweak little bit to show which window is open on quick notification. So user doesn’t have to open app always. or an announcement system [ smart speaker] if a window open
-
Emoji's in Room Names
It would be great to be able to "color" code the rooms with emoji's for an even nicer overview in the app homescreen. Currently some emoji's work fine (e.g. "✨ Bedroom"), while others result in an error (e.g. "🪴 Living Room"). The error after submitting a name with a "faulty" emoji:
-
Quick on off button per room
Hi! The Tado app mainscreen already features a on/off button pictogram on each room. I would love for them to work as on/off buttons too! So you can resume schedule or stop heating a specific room with just one click.
-
Geo Fencing Position Override
The geo fence is based on a location and a radius. The location is determined by the address given to the home but cannot be overridden. It is problematic when a building or a unit is far from the street (courtyards, especially in Berlin), or for houses built far from the road and requires to increase the radius. It should…
-
Receive smart meter data
Either access smart meter data, or contact loop to share their access. Use this data to attribute costs to room schedules.
-
Admin users and managed users
Admin users have full access to tado, and managed users just able to adjust the temperature in rooms for a set time period.
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Display must be on all the time
I would like to request tado to add continuous display feature which shows temperature or another animated messages ..which makes it very cool ..hope everyone wants it too
-
TRVs recognising when a call for heat has failed
I got up to a cold house this morning. I looked in the app and all TRVs were “heating to 20°” however, despite it being 8.15am and my schedule being set to start heating at 6.45/7am all rooms were still only 16° or thereabouts. It turns out my combi boiler had dropped pressure resulting in the boiler being unable to fire…
-
Homepage tile ideas (outside temp & wood burner temp)
Hi, just something that would be good to see would be ability to add a tile that displays outside home temp (via weather info source) and wood burner temp (of course would require additional hardware)
-
13 amp controller
Make the wireless thermostat capable of switching 13amps for heaters etc.
-
Support for UFH pumps
I have a single room with underfloor heating and would like to switch the manifold pump when the room calls for heat. This avoids inefficiency from circulation when the boiler is off. Ideally the pump would only be enabled when the room calls for heat, but it would also be okay whenever the boiler is on. I would prefer to…
-
Smart Schedules Profiles
As a user I want to be able to have multiple smart schedules that can be assigned to rooms without having to copy and paste. For example, I want a Smart Schedule for summer time and another one for winter time without having to tweak the temperatures or, for example, turn off a room, the office, while I am on vacation.
-
Mode that emulates a manual TRV behavior for Smart Radiator Thermostat
I wonder whether anyone else would find this useful: Problem: old leaky house that is unable to retain heat, potentially with mixed heating modes. Second problem. How to make best use of a boiler firing when zone is not expecting it. Solution: introduce 2 new modes for Smart TRVs - Passive and Passive Limited. The idea…
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
Control non smart TVR radiators independently
The system must have the capability to turn my heating system on but shut the smart TVR’s. That way I could heat my towel radiator without needing to heat another room unnecessarily. Surely the wireless receiver could call to heat whilst the smart TVR are closed thus heating all non smart TVR equipped rads.
-
App home screen icons show % tvr open and issues low bat calibration or manual
Having the % open of the TVR on each room icon. If manual activated show hand Also any issue show on the app icon.
-
sleep at night with windows open - skip frost protection
Here in the UK overnight temperatures are often 1-2 degrees C, and I like to sleep with the bedroom window open. I suspect this fools Tado into turning on the smart TRV controlled radiator directly under my bedroom window. I'd like the 5C Frost Protection to a user definable number on a per-room basis or per device basis,…
-
Use standby heat setting +8/10C in my heat-pump thru tado?
Hi, I can't use standby heat setting +8/10C in my heat-pump thru tado. That is essential when I lower temperature when I am not in my cottage. Cottage could be empty for several weeks. I is no point to keep temperature over +10C. Standby heat setting 8/10C+ is separate button in Panasonic heat-pump remote. Is it possible…
-
Lodgers tado app
I need my lodger to tell tado when he is away or at home But I feel for security he should not be able to adjust the control on the heating etc
-
Set a delay in closing the smart valves after the "OFF" command to the boiler
When the boiler is sent to OFF, by the thermostat or by the intelligent valves, there is always a post-circulation time foreseen by the various manufacturers to allow the disposal of the residual heat. With Tado the thermostatic valves are closed immediately, generating overpressure in the circuit, and forcing you to leave…
-
More options to the Energy IQ
I have geothermal heating in my two-family house, which heats an underfloor water bearing heating system. To control it I have a bunch of actuators at two manifolds and thermostats in the rooms to control the heating. The app does not recognize my boiler, and thus I have chosen the closest one in the list I could find. I…
-
Cubic Feet and Standing Charge in Energy IQ
It’s great being able to add meter readings to get an idea of cost but in the UK many meters are in cubic feet not cubic metre so would be good to have this as a measurement type. Also the forecast cost does not include a daily standing charge and it would be really useful to be able to add this too…
-
Prijsplafond in de app (grafiek)
Mijn suggestie om het prijsplafond in de grafieken te plotten. Op die manier is het verbruik tov het plafond nog inzichtelijker. Lijkt mij ideaal.