-
Ariston clas he evo 24 boiler
My original set up was 2 thermostats wired up which where TP400 Danfoss upgradead to starter kit wireless thermostat with receiver combi boiler my system tested it can control to reciver from app or thermostat but doesn't connect to boiler ! It was wired up to where thermostat was not into boiler direct so do you think…
-
Connecting a Smart Wireless Temperature Sensor X to the bridge
Dear community, I joined newly the Tado community. At home, I have installed so far 4 Smart Radiator Thermostat X and one Bridge X. My first impression were OK. I wanted to add Smart Wireless Temperature Sensor X to have a more accurate temperature measure. During the installation in the app, I receive a failure "Thread…
-
wired or wireless tado v3+ ?
I currently have oil central heating in semi deteched house with two wired thermostats. On the programmer thats fitted, i can turn the heating on downstairs and upstairs and turn on hot water all separately upstairs and downstairs have a wired thermostat which are active if the programmer main ac is switched on. I done the…
-
Installation of Tado
Hello, I have a tado wireless thermostat. My tado wireless receiver stopped working, so tado has sent me a new one. I am getting an electrician to swap the old tado wireless receiver for the new one that tado has sent me. I have seen the installation manual online, and it talks "using the Wireless Temperature Sensor to…
-
Greenstar 27 Ri with eBus wiring centre installation
Hi, I have read conflicting information whether Tado is compatible with this boiler. It says all Worcester boilers are but when I go to installation instructions on the app it just errors out. From what I have read Tado can talk the eBus language of these boilers but only if you have the EU version of the wireless stat or…
-
Worcester Bosch ‘Quick Tap’
Hi all, I’ve just had a Worcester Bosch greenstar 4000 installed. It’s supposed to have a ‘quick tap’ feature where you turn the hot water tap on for a couple of seconds, turn it off and and wait for 20-30 seconds and then hot water comes out instantly. This hasn’t worked since the boiler was installed, the tado works in…
-
API Integration for Energy IQ
I use the energy provider Octopus In the UK, and they provide me with an API key for my account that can be used for getting meter readings and other things. It would be so good if, in Energy IQ, I could put in the API key so that the meter reading were added automatically.
-
What actually is 'weather adaptation'?
Could anybody clarify to me what the weather adaptation feature actually does as I cannot find any information online. I have been advised by tado helpline that it take account of sunshine hours, but it does NOT adjust the flow temperature as a weather compensation function on a condensing boiler would. So, does anybody…
-
Wireless thermostat
I've come across a setting showing R01 etc what settings would this need to be on for combi boiler I have no Tado TRVs just basic ones ,reson why asking is it doesn't seem to operate my heating
-
Energy IQ - Usage is not based on actual meter readings
We were away from home for about one week and wanted to try an experiment with usage data. Our heating was in away mode throughout and did not switch on. I submitted regular meter readings within Energy IQ at the start of April, then on the day we left, and as soon as we returned, and on the following day. The meter…
-
Tado V3+ v X?
Hi, just about to install V3+ into very old (1653) house with stone interior walls etc. Should I change to X series? Thank you
-
Can I use 3 wires in 2-way wago when to connect tado wireless receiver?
I posted a couple of days ago about removing wires from a choc block: https://community.tado.com/en-gb/discussion/comment/84318 The wires are now out (better screwdriver was needed...), but I've got a question regarding the wiring. The neutral and live wires are split in two, and it appears they were connected by the choc…
-
Upgrading existing controls. New member thinking of buying?
I've an oil boiler so cant modulate my heating. I have a 2 channel programmer for heating and hot water control which is a Horstman Model H21 Channelplus XL and a wired in separate Drayton RTS 1 room stat. The H21 controls the heating and hot water and switches on the stat when the heating is on. I was wondering about just…
-
Energy IQ Meter Readings: New gas meter, restarts at zero
Hi, I've logged my gas meter reading in the Tado app in "Energy IQ => Meter Readings => Add" a few times each month. A few months ago, our gas meter had to be changed and the readings on our gas new gas meter now restarted at zero. Can I just put the zero and subsequent readings into Tado's Energy IQ Meter Readings, and…
-
Air source heat pump linked to UK's Octopus Energy Agile Tariff
Tado should add the ability to heat up the water cylinder using an air source heat pump based on the cheapest energy rate of the UK's Octopus Energy Agile Tariff. This could save lots of £. It would need some AI or the like to spot what is likely to be the cheapest rate for the day, though that may be quite stable and for…
-
Success with linking electric underfloor heating?
Has anyone had any success with linking electric underfloor heating with Tado? In general Tado does not seem to support connectivity with electric underfloor heating, but does point to Is tado° compatible with electric heating systems? which in turn points to Manual for Professional Installers, implying that it is at least…
-
Problem removing wires from old programmer
I'm currently in the process of transferring my old programmer to the tado wireless receiver, but having taken the faceplate off and removed the wires, I'm now unable to actually free the wires from the cable clamps(?) due to the screws. Not sure if anyone's had a similar issue getting them out or if I'm missing something,…
-
Tado overheating rooms
I bought a house with a tado system and I'm struggling to get the temperatures right in the different rooms. When I set the temperature to 20 tado heats the room to 25 before it stops. The problem is more outspoken in smaller rooms and I do think that the radiators are rather oversized for the rooms they're in. It seems it…
-
Vaillant Turbomax plus 824E
Has anyone connected the V3+ starter kit to a Vaillant Turbomax plus 824E? I don’t want to go out and buy it and find it’s not compatible or doesn’t work properly once fitted or it takes weeks to set up and is a pain in the buttcheeks. Thanks for any info 👍🏻
-
Android 15 app issues?
My Pixel 7 updated to Android 15 yesterday, and today the tado app refuses to move past the tado splash screen. Initially I assumed there was a server outage somewhere, however the app is fine on wife's iPhone. Anyone else experiencing issues?
-
Thermostat constantly switches boiler on and off
Hi. Installed the tado thermostat yesterday, while I like the app and smart scheduling - I just don't understand the way the thermostat alhorithms work. I have a Daikin heat pump with two zones. Temu is installed into one zone. I set the desired temperature in the zone to 21 and the heat pump worked all the time until the…
-
HW not starting boiler. CH ok new Tado V3+ Wireless setup
Morning all, new to the game, wired up the receiver last night and the boiler fires on for the heating but nothing for the HW like it would. hot water cylinder and header tank in use. 1)Old programmer cabling 2)New wiring 3) Wr1 4)Devices replaced TIA
-
Non smart TRVs seem to be turned on when they shouldn't be, please help.
I purchased the tado starter kit and 6 smart TRVs. I have my wireless receiver in my garage attached to the boiler. The bridge is in my front hallway beside the router. I have 3 rooms in the house that don't have smart TRVs added. I have my wireless temperature sensor in my front hallway along with the bridge and a…
-
Boiler not switching off
Installed the Tado starter kit V3+, Installation easy enough with wiring instructions provided for replacing the existing controller and room stat. Problem is that the central heating is always on regardless of settings. The boiler continues to be on. the only way to turn off the CH is to switch of the mains supply to the…
-
Can’t add 2 houses?
How can I add my 2 separate properties on to one account it doesn’t seem to allow me to do this
-
Contacting Tado Support
Hello everyone, My tado stopped working one week ago. I messaged Customer Support and had an answer withint a few hours. They guided me through some tests I needed to do to the Tado. I did these tests and sent them the result. However, the Tado agent did not respond. Over the past 4 days I have tried contact Customer…
-
All tado devices suddenly offline
This morning all my tado V3 devices are suddenly offline. The internet connection is fine, and I have restarted the radio receiver but still everything is showing offline. I have paired the wireless thermostat as well. Any thoughts & suggestions welcomed Nick
-
Tado v3+ wireless thermostat with hot water
Hey guys , I bought the v3+ starter kit with hot water control (wireless) and having trouble wiring it up to my boiler My boiler is a Worcester green star 30si Mk iii. I will attach some pics of what I have done app works , paired just doesn’t seem to put heating off and on etc On my boiler panel I have (N , NS , LS , LR)…
-
Tado x smart thermostat and Junkers boiler
Hi everyone, I have a Junkers boiler and a Fw120 thermostat that I want to change for a tado x smart wired thermostat that I just bought. My Fw120 thermostat has b1 and b4 wires connected, also a b2 wire not connected. Do you know where those wires from the boiler should be plugged on the tado x smart thermostat? I tried…
-
Tado TRV not calling for heat
In the past 2 days one of the trvs seems to have stopped calling for heat. When I turn up the rad it doesn't switch on the boiler. It shows in the app that it's calling for full power but the temp in the room drops