-
Hysterese afstelling
Kan iemand mij vertellen wat de Hysterese afstelling is,en of ik deze kan aanpassen?
-
Tado sometimes stops heating
I've had a few occasions recently where the TRVs are calling for heat, but they don't get it. I can resolve it by pressing the test button above the 3 wavey lines on the receiver next to the boiler. I don't need to intervene on the boiler. I have 11 rooms. It seems to happen every few days. It was working fine before…
-
Tado radiator thermostat doesn’t calibrate
I have one tado radiator thermostat that won’t calibrate. It used to work and been fully functional for over a year. It also only briefly flashes ‘Hi’ for a fraction of a second, when prompted by the app. The brightness of the display is also very low. The batteries have been changed. Any help would be appreciated.
-
HomeKit going to sleep?
I installed a v3 starter kit a few days ago. I seem to have a repeat issue where first thing in the morning the thermostat in HomeKit is status “no response” if I go into the Tado app everything is fine and I can control it. Once I turn it on through tado the thermostat becomes responsive through HomeKit and will stay…
-
Merge "deleted rooms" with a new room created
I have deleted a room and re-configured again due to malfunctioning radiator thermostat. Now in my "heating activity" dashboard it shows the history of this room in "deleted rooms". Is there any ways to merge this deleted room to the new one I've created so the statistics aren't disturbed?
-
2 zone setup with 2 wired thermostat and without boiler thremostat
Hi, I think it was discussed for a long time but search is hard. I am new to Tado, just bought 2 wired thermostat and 8 x Smart TRV which my house had 2 zones for Lower and Upper floor with a wired thermostat for each floor and a combi boiler without water tank. My question is when I installed the Tado TRV to the radiator,…
-
How to improve the learning of the thermostats?
I’ve had Tado installed for a year now and in the most part I like it. However, it is always overheating rooms. I have UFH in 3 zones and set it to 20°C. It will easily get past 23°C often. I thought the thermostats were learning? I’m just not sure why it isn't better at figuring when to turn off demand in our…
-
Wireless starter kit
Have replaced Drayton wireless thermostat and SCR receiver plus Honeywell 699. Hot water works ok but CH doesn’t work. It seems the thermostat/control unit just won’t trigger the boiler. Any thoughts? Thank you in advance.
-
Danfoss RAS C2 TRV Bodies Compatibility
Can I ask if anyone is still having issues with getting flow through SRVs when boiler is called. Have spent a considerable time with support getting valves opened and delaying boiler calls. If you have issues what type of valve do you have? I have new Danfoss RAS C2 and I understand that other systems have had to update…
-
Will tado work for my house?
I don’t know anything about heating systems. But my goal is managing the temperature of each room separately, make it comfortable and save money. I have Eneco district heat with Honeywell chronotherm IV in my leaving room. My house has 2 floors and 7 radiators (normal ones not floor). 1st floor 3 radiators - 2 in the…
-
Is my current setup compatible with tado ?
Dear all, I have a Siemens RDE100.1DHW thermostat. I use this to control my heating system and also have independent control to hot water (DHW). I want to replace it with a tado system. I believe the Wireless Smart Thermostat starter kit is the appropriate one due to separate DHW. My present thermostat works with batteries…
-
how to fix devices not talking to each other
I've run tado successfully here for five years. I don't remember doing anything unusual at the start of summer to switch anything in the system off. Hot water has run as expected over the summer. Today, switching a radiator on for the first time, there's no response. The iOS app shows everything connected, but when I…
-
New Tado installation, all working but...
Replaced Drayton wired thermostat and old controller with Tado Wireless V3+ along with 6 Smart Tado radiator valves. The boiler is a Grant 21E Oil boiler. The issue I have is the central heating pump is always on, the boiler however works when required, turning on and off as expected, just the water pump on 24*7. I have a…
-
No Heat! How do I fix it?
Hi All, I had someone install my tado v3 kit a few days ago. I have since found I have hot water but no heating. The App says it's on, and the light on the wireless reciever is on, but the pump in not pumping and the boiler is not firing. I have attached a picture of the current wiring. Can anybody tell me if this has been…
-
Question on modulation
Is it possible to see anywhere the temperatures that Tado is requesting from the boiler? I can see people posting them in some threads, but it's not clear to me where to get that information from. Thanks
-
Screw size for replacement
Hi, I've managed to lose one of the screws shown in the red box below. Does anyone know what size they are so I can get a replacement one from somewhere? Please disregard the wiring in this photo, the photo was taken when things were being moved around and tested. Thanks
-
Tado V3 User Open Window Detection Stopped Working When New Thermostats were Added
Hello Tado Owners, Help me understand what went wrong. I currently have Tado V3 bridge with 6 thermostats - 3 thermostats which are firmware v54.20 and 3 thermostats that I bought recently to add up which are firmware 95.10 I have the fully paid V3 app, with Auto-Assist enabled and Open Window Detection also enabled Up…
-
System calls for heat outwith schedule
Recent installation with 10 year old Worcester Bosch Greenstar boiler. System appears to be working well, however it generates spurious calls for heat outwith it’s scheduled on time, normally overnight. The preheat option is disabled, I have a Deco mesh Wi-Fi, through a cable modem. Any suggestions re cause or fix?
-
Explanation of the 3 Wavy Lines....???
Hi everyone, Earlier today I raised a question with Tado Support.... I have asked them to give me a 'definitive' explanation of Exactly what is happening when any of the 3 wavy lines are displayed.,,,,,,,,,ie 1 wavy line means.......??? 2 wavy lines means.....??? 3 wavy lines means.....??? There are actually a few possible…
-
Normal radiator TRV valve vs Tado smart TRV valve
I have 9 normal TRVs valve on 9 radiators. I am planning to have a tado° Wireless Smart Thermostat Starter Kit V3+ and just 1 tado° Smart TRV Thermostatic Radiator Valve. Will my other 8 radiators still heat up along with the one with tado smart radiator valve? Or I need to have Tado smart radiator valve in all radiators?…
-
Tado V3+ and Vaillant Ebus
Hi, I currently have a Tado V3+ wired starter kit coupled with Tado smart TRV's. I'm about to replace my boiler, will Tado modulate a Vaillant Ecotec Plus? Or am I better to stick with a pure Opentherm boiler like a Baxi or Viessman?
-
Energy IQ Meter Readings: New gas meter, restarts at zero
Hi, I've logged my gas meter reading in the Tado app in "Energy IQ => Meter Readings => Add" a few times each month. A few months ago, our gas meter had to be changed and the readings on our gas new gas meter now restarted at zero. Can I just put the zero and subsequent readings into Tado's Energy IQ Meter Readings, and…
-
Home Assistant AND TRV-Control - beyond primitive "on/off"
--- Overview: My "Problem" is, that I want to control our Tado-TRV's beyond "on/off". But, the automation for HA, is ONLY "on-off". Plus that the "control-chef" is "not defined /unclear" (Local/Tado/HA/App). --- and, In depth: I cannot find any option, to hand the "temperature-measured" to the Tado-TRV's (like if the…
-
how to set another wired thermostat as measuring device? (not zone controller)
Basically I have two wired thermostats controlling actuator valves for underfloor heating in a big living room. One of them is in a very warm corner so it never opens the valve to heat the floor. I would like to use the other wired thermostat as measuring device only. If I set the other thermostat as zone controller, the…
-
Add Months to schdule
I’m a recent newbie to getting this and I found it really good. I think a great idea would be to add months to the schedules rather than just days. This would then be useful for setting the schedules per summer months and winter months.I had a digital thermostat which did that and I found worked well as never had to touch…
-
Tado Thermostat wiring
Hi there, I’m thinking about buying Tado Thermostat but I’m not quite sure if I will be able to wiring Tado on my current thermostat wires. Thermostat I’m using now is Siemens RWB29 which is mounted right under boiler and Siemens RAA20 temperature controller which is in my living room also I think is worth to mention I’ve…
-
Mention remove the existing wireless receiver
Hi all, just installed the wireless starter kit v3+. The installation instructions for Viessman Vitodens 100-W B1KC did not say anything about removing the old wireless receiver. It would be nice with a little mention on that :)
-
What's the point of having smart trv's in same room as wireless thermostat?
I'm getting some tado smart trv's but despite reading various answers I still don't see the point in having them in the same room as the wireless thermostat. Can somebody clear this up? Should I have smart trv's on both radiators in my living room where I already have the wireless thermostat? Thanks
-
Existing thermostat
Do I have to decommission an existing Drayton SCR and wireless Digistat+RF to get my Tado system to work or can I just remove the whole thing including wiring?
-
Allow "Auto" within HomeKit
Many smart heating systems when exposed to HomeKit allow the use of "OFF, HEAT and AUTO", even Drayton Wiser which can only be exposed through a custom made plug-in via homebridge can use AUTO. The AUTO function (at least as I see it) would allow the system to return back to the current schedule. For example, in HomeKit I…