-
Landscape mode
I am using my Mobil in the Car and I using the Mobil as a navigation (Android) and if I won't to se the temperature on my Tado Ind my home it is problematic, now Landscape mode ? I can't se the status in My home ! Almost every other apps is using the landscape mode. Best regards Bo Cramer
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Relaiscontact thermostaat schakelt onverwacht.
Probleem: Na plaatsing van een nieuwe Tado slimme thermostaat in de woonkamer duiken er problemen op dat de thermostaat de verwarming onverwacht inschakelt, dus op ogenblikken die niet in het slimme schema staan. Hij luistert ook niet naar de handbediening: vb. ruimtetemperatuur is 19°, relaiscontact van thermostaat is…
-
1,0 degree isotherms in graphs (now 1,5 degree)
Currently in the temperature graphs the horizontal isotherm lines are spaced 1,5 degree Celsius apart. This makes the reading very uneasy and awkward for the untrained observer. Can you please set them 1,0 degree apart?
-
Set manual on off temperature
I would like to be able to set a manual on/off temp. For example the room will heat to 21 and turn off. It then won't call for heat until the room reaches 18 at which point it would bring the room back up to 21 before turning off.
-
Boiler external weather sensor + tado
It would be nice for tado to use the boiler external weather sensor if installed while running on opentherm/bus for more accurate heating. Why? Well, weather stations are not all over the place and not so accurate in some zones, so it would help people in remote locations.
-
Hot Water temperature control
See this thread https://community.tado.com/en-gb/discussion/comment/54598#Comment_54598
-
Commande tadoo pour les poêles à pellets
je voulais juste savoir si vous pouviez mettre vos ingénieurs sur le coup et inventer un tadoo compatible poêle à pellets ça devient important pour nous personne ne commercialise ce système et pour ma part la marque Mcz ne souhaite pas faire évoluer ces anciens poêles en wifi. la télécommande est infrarouge elle prend la…
-
Calibrate offset of TRVs automatically based on wireless thermostat
Hi Please consider using wireless thermostat as an auto calibration offset tool within a room. Now have TRVs on all radiators. Put wireless thermostat into the area of the room I'd like to adjust the temperature to. Have TRVs in room check their offset against that wireless thermostat and adjust automatically. Have this as…
-
Climate report in Tado Web app
Hi, To me, the availability of the climate report in the web app - app.tado.com - would be a big improvement. Preferably combined with option to export (CSV) and also to compare the reports between different (or similar rooms (between bedrooms fi). This is feature high on my feature list. Greetings Christophe
-
Energy IQ - room heater size
Allow us to enter the size of radiators or UFH systems in rooms to get a better estimate of which rooms actually use the most heat. At the moment I assume the estimates are useless as my 300W towel rail is the highest usage in my home despite having multiple 2kw radiators elsewhere.
-
App Notification
Add notification on the home tile page to show that tado are performing maintenance or are having issues. Twice this month I can see the internet bridge cannot connect (network tools) and the boiler stays on.
-
Offset Identifier on Tado Thermostat Tiles
I use an offset for one of my thermostats to avoid the frost protection kicking in when I don't want it to (given that there is no way of setting a minimum temperature manually). Could there be a symbol or other identifier on the Home Screen tiles for when thermostat controllers have had an offset applied? Or even the…
-
Configurable schedule
Currently we can have 1 schedule for all days of the week, 3 schedules: weekdays & Saturday & Sunday or 7 schedules: every day separate. Can we get a way to define this in a custom way? I work from home 4 days a week, so to be able to schedule those days separate from all other days would be so much more convenient! It…
-
Different houses
I would appreciate to be able to manage my 2 houses from the same app and account. Currently this is missing
-
Boiler service logs/recording
Add boiler maintenance recording to the care & protect tab with reminders for servicing due.
-
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode also ability to remove the heat mode displaying from the apple home app
-
Relay modules (1/4/6 channel)
Now, if we vant to create heating zones (with a pump or Underfloor heating manifold), it need a wired thermostat each zone and same number of wireless temperature sensor. It really expensive and we need buy a device that we not use 90% of it abilities... (wired thermostat, we use it a simple relay mode, not measue…
-
Inputting heating bill for oil kerosene top up.
Is it sensible to firstly input the previous year's oil consumption and average price before we input the last heating bill. Do we use units ie is a unit a litre. Oil is 10kw/litre or is a unit a kw? What's anyone else doing? I have asked via the bot but not got an answer yet.
-
Dual SRV Offset
I know that the Smart Radiator Valve offset issues have been discussed extensively but I would like to offer my 2 cents. In one of the rooms in my apartment, I have a tado SRV installed and I also have a room thermometer. I check their measurements from time to time and when not heating they are very close to each other…
-
Names, notes and status
It would be useful, at least to me, to be able to give a name/location note to each individual Smart Radiator Thermostat and I would also like to be able to see the open/closed status of each SRT.
-
Font sizes on Home screen
font sizes for room names and temp settings too small - seems to me there's enough space to make them more easy readable.
-
Tado door sensor - security alarm
Think there is a big market gap for a Tado door sensor & home security alarm. That can build on the home away function of Tado.
-
child proof fixation of the radiator thermostat
The radiotor thermostat comes loose way to easy. My 14 months old kid had it loose in no time. What is the point of having a child protection mode in the software, if the hardware is not child proof.
-
Combine Rooms & Settings with Home Tiles
It would be much more helpful if you could see the details of the radiators and room under each tile – particularly the battery status.
-
Pausing a room
It would be great to be able to pause a room. Tado is great at providing granular control of each room. But for schedules - its only possible to operate at a whole house level. Either i can turn off "all rooms" or "Boost all rooms". being able to turn off or pause a room feels like a pretty useful and essential item. the…
-
Internet Bridge better wifi compatibility and coverage with new wifi standards wifi 6E and wifi7
Internet Bridge and all Tado devices beter wifi compatibility and coverage with new wifi standards wifi 6E and upcoming wifi7. Updates for better software experience.
-
Users of different categories
I would encourage Tado to introduce users with different categories i.e. one administrator, who makes all smart schedules and other settings, one user category, who can be assigned the role as adminstrator for one room, and one user category, who is read only, but counts in the geofencing. The reason for this is that i…
-
Hot water boost
Hi - just installed tado radiator thermostats and a hot water and thermostat- so now fully invested in the tado system. The only thing we are really obviously missing is a 30 min, 60 min , 90 min hot water boost which then switches back to programme afterwards. Would really love to see this otherwise likely will switch…
-
Add integration with the DCC database and other Smart Databases
I have the “Hugo” app what is fully aware of my energy usage that it collects from the DCC database. Being able to integrate this plus integrating tariffs such as Agile by octopus energy into the “smarts” of the product. As an example in the summer I would love it if left over power from my solar panels or cheap off peak…