-
Thread
Thread is the future of smart home connectivity and will also help people struggling with Tado range issues. Thread should also help grow network size without overwhelming the system as it becomes more resilient.
-
TADO to distribute service engineers
Please consider travel service engineers who understand TADO to visit customers with TADO heating. Encouraging appointment home bookings to solve problems. Web Chat not always the best for communication.
-
Hot water monitoring & Tado hot water tank thermostat
Hi, I'd like to be able to monitor our hot water, so I can see when the hot water is requesting heat from the boiler and ideally see the temp of our cylinder tanked hot water. The app shows simply off and on. We have the Extension Kit controlling our heating and hot water. There is no way of telling when the hot water has…
-
Stronger TRV mounts
My Tado TRVs have only been installed 6 or 7 months but I’ve just found one of them has come off because the plastic lug that locks the mount to the body has cracked and is broken. It strikes me that the plastic part of the mount is a weak point in the design and appears to be the one bit that, if broken, prevents the…
-
Better overview of all schedules in one view
I’d find it really useful to have an overview of all the schedules of my smart valves so I can see when the heating generally kicks on and off to be able to review my system more efficiently. At the moment I have to check every valve individually just to see I’m when everything turns off and on in order to refine my setup
-
Changing the maximum flow temperature myself
Initial problem: Hello, i have a Ferroli Bluehelix PRO 32C heating central. I use tado for 3 years now. After last update of Tado APP to version 6.0.2 (9826) i found following bug. I limit maximum temperature of heating using heating buttons on my boiler to 55C. After this update, maximum flow temperature is reseting…
-
TADO INFORMATION UPDATES
For those interested in Tado I believe that it would be good to be able to subscribe to ad-hoc email updates on things Tado related that Tado are open to share with their customers - whether that be firmware updates, hardware updates, press releases or collaborations with other companies etc. If there is such an option or…
-
VA03 Smart Radiator Thermostats support a charging port?
Will the next version of smart radiator thermostats include charging ports? Will make life a lot easier. I'm stuck with VA01's. Unless there is an introductory offer that I can't refuse I doubt if I'll change them. If I did I'd die happier if they had charging ports 😕⚰️😌
-
The Big Idea Archive
We have reached 24 pages of ideas, and the overview is lost. To enable new users to get an overview of the most popular ideas, all ideas that did not receive any upvotes in the past years will be archived to this topic. You can give your idea a 2nd chance by opening a new topic if you wish.
-
Release a smaller, cheaper Wireless Temperature Sensor for the Smart Radiator Thermostats
The recently released "Tado Wireless Temperature Sensor" is essential, in many scenarios, to have accurate operation of the Tado Smart Radiator Thermostats. Which, due to their proximity to the radiator, are not typically able to measure the actual room temperature themselves. However, many find the price (£69.99 / 79,99€)…
-
Show heater temperature information when heating (+ control parameters)
Currently, using OpenTherm, Tado can ramp up the heater temperature very quickly. Sometimes even reaching 80 degrees. It would be great if a tile in the app can show the temperature of the water in the heating system. It is indicated on the heater itself and also on my previous thermostat. Offering this in a graph showing…
-
Improve heating algorithm to wind down heating power earlier, to prevent temperature overshooting
In using tado radiator valves and thermostat, I notice they almost always overshoot their intended temperature. That's usually because the heating power will remain at full strength almost until the temperature is reached. It would be better if the algorithm supports earlier wind down of the heating delivered so the…
-
Allow users to set heating parameters to reduce pipe noises, energy drain, improve normal heaters
During my use of tado equipment I noticed the early start algorithm can start very early, heat the heater to 80 degrees, and occasionally really ask for a lot of power from the heater very quickly. Especially in older homes/older installations, this can cause issues: You wake up early when the heater wakes up, even at…
-
”Slow start” feature for less thermal stress
Opening the radiator valve fully with a cold system might cause unnecessary thermal stress on the system (and noise due to thermal expansion). Ramping up the valve for a short time might reduce the stress. I suggest a feature in line with “early start” called “slow start” to automatically ramp up the opening of the valve…
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Improve Internet Bridge so it reconnects automatically
The Internet bridge often disconnects from the Internet leaving the Tado system unusable. Please improve its firmware so it reconnects automatically as every other IoT I have does. Currently, the only option is to power cycle which is unacceptable when it happens at 4am, and we wake up to a cold house....
-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Device grouping
Be able to group devices in to zones/areas Rather than having to turn all devices on if needed set a group for example downstairs/upstairs or whole house which would turn the grouped devices to the same settings
-
Expose humidity and temperature sensors to HomeKit
It would be very useful to have the humidity and temperature sensors exposed into the HomeKit environment, in order to allow the creation of automations in the Apple Home app. This could be extremely useful for instance with the Smart A/C controllers: for example, to create an automation to automatically power on the A/C…
-
Option to enter two offset values on TRVs
One offset for when radiator is off, and one when radiator is on. This would hopefully be a simple fix for the issue where the temperature around the radiator is warmer than rest of the room when the radiator is on. (Seen especially in vertically mounted TRVs.)
-
Plot all rooms on same graph
Perhaps with selectors to show/hide rooms. Would be great to see the interaction between temperatures!
-
Temp/Humidity graph improvements
Please consider the following Temperature graph improvements... add increased resolution grid lines, ie. 1 degree and hourly coloured line showing set temperature join each 24hr section. No gap, same vertical grid resolution add to PC version app Thanks
-
Scroll between rooms in mobile app
Hi I think it would be usefull to be able to scroll between rooms on mobile app with swipe left or right ...
-
Limitations for larger properties
So, I've got a large property - 19 rooms 10 downstairs including hall, 9 upstairs including landing. Its an odd L shape as well which means i have concerns about distance. I was excited when i read tado supports 25 devices... and then i realised the limitations...having spoken with 1st line support... I want to zone each…
-
Outdoor thermometer
Would be good to see outdoor temperatures on home screen, possibly linked to turn on heating if temperatures drop
-
Android & iOS Widget
Now that iOS also supports widgets, it would be useful to be able to have widgets on both Android and iOS phones so that you can set the temperature for a period of time. For example: Set the temperature in the widget to 23 degrees for 15mins
-
°tado in the summer months
I am very happy with the smart radiator thermostats. But it’s a pity that they don’t unlock their full potential in summer months. On hot days, most people leave the windows closed during the day so that the apartment does not heat up unnecessarily. How convenient would it be to receive a push message in the evening as…
-
Show battery status in the app
Would it not be possible to make the app do it's possible to see battery status. That's possible in other of my smart home units It's annoying that i can't see when it's time to put me battery in, so have to change often as i normalt travel very often when it's not Corona time
-
Invite users only for geofencing
Hi, It could be a good idea to invite people on the app only for geofencing (right management or another app only for this usage?). My kids are at home from time to time between school sessions and i need geofencing to heat up the home when they come back. But i don't want my kids to play with tado settings. "Oh, it's cold…
-
Different Scenarios for Heating Schedules
Loving the Tado (but hating the 10 room limit) and I would like to make a heating scenario suggestion. This is to allow simple, perhaps temporary, changes to the heating schedule according to a set programme based on scenarios. The current way of working is to set up one scenario of daily heating and any changes require…