-
Buderus logamax plus gb072 (RC310)
Good day, I want to buy a Tado smart thermostat. I have a gas condensing boiler at home, brand Buderus logamax plus gb072-24k. I already bought one thermostat of another brand, which unfortunately could only On/Off, and I need it to communicate with the boiler also based on changes in the temperature of the circulating…
-
Has anyone found 'early start' worth persevering with?
Hi, Day 4 of our tado system up and running here. A few teething problems but so far OK. I've done some forum searching now and see the 'early start' function does not get a lot of love! So far the rooms I've had early start activated on (I've followed advice is earlier threads and not used it in smaller rooms - only in…
-
Changing internet provider
I am changing my internet provider do I have to do anything for Taxi to operate
-
Replacing a Tado wired Smart Thermostat with a Tado Wireless Smart Thermostat
Hi all I currently have a Tado V3+ smart thermostat hard wired to a Tado V3+ Bridge. The location of the thermostat and wiring is historic and due to a remodelling of the house this thermostat is simply in the wrong place. Because of its location the heating is constantly trying bring the heating up to temperature in the…
-
Replacing BOSS THERM wireless thermostat
Hi I have ordered a Tado Wireless Smart Thermostat Starter Kit V3+ with Hot Water Control and currently have a “BOSS THERM” thermostat and receiver (looks just like a Siemens) connected to a Glow Worm combo boiler. Will it be a easy swap?
-
wired thermostat - wiring
help wired thermostat Logic Heat 15 Boiler I’m replacing my Therma Wired Thermostat with a Tado wired thermostat, need help with the wiring and set up.
-
Energy consumption with Tado
Hi Everyone, I updated my old wired thermostat and programmer with Tado Smart V3+ wireless system (including smart radiator valves). I set individual temperatures in every rooms and I realized that my boiler is on much frequently but for shorter periods than before, according to the heat demand per rooms. Obviously trying…
-
Swapping BPT TH/124 with tado° X
Hello chat, I'm looking into swapping my current BPT TH/124 with a tado X, but I'm unsure about the compatibility as I'm not finding a wiring diagram matching my thermostat. From what I'm seeing, it should be compatible and pretty straight forward as current wiring is on C and NO (NA), which should be pretty much the same…
-
Last ditch attempt before I send my Tado wired thermostat back (UK)
Hi all, I am wondering if anyone has successfully got the following to work and if so, how? I am just at the point of giving up and returning the Tado Wired thermostats. So the background is: I recently moved into a new build and it has a combi boiler and a dual zone thermostat wired setup to a wiring centre. The boiler is…
-
Tado X No Matter Code For Wireless Reciever X Therefore No Hot Water Control
When running V3 I had linked the bridge to Homekit and had a hot water option in home kit. Just in the process of adding my new X equipment to homekit and expected to see a matter code on the wireless receiver X so that I can add the hot water control to homekit but no code present. How are you supposed to add hot water…
-
after mounting the thermostat the calibration doesn't start and show it's not mounted yet.
My thermostat V3 does not recognize when it is mounted. When putting it on the socket at the radiator it just does nothing. How can I make it recognize that it was just mounted on the radiator to start the calibration etc.?
-
Tado Manual Control settings
Recently one of my radiator valves has not been following settings - in the settings I have it set that when I manually change the temperature it should do it for a set time. This wasn't happening and it was just doing until I resume schedule. I contacted tado and they asked me to swap it with one that is working…
-
Why does 'wired' thermostat require batteries?
Considering replacing wired thermostat (+ controller) with Tado wired system. Why does Tado 'wired' thermostat require batteries. In the proposed installation, a remote village hall, battery thermostats are a no-no. If allowed on here, and if Tado DOES need batteries, can anyone recommend a system that doesn't, but still…
-
why does my Tado ignore my schedule
for some unexplained reason our TADO keeps ignoring the existing schedule and decides we only want/need 7 degrees. Any ideas?
-
Open Letter with ChatBot support team
My apologies for the odd formatting in the document, I wanted this published asap since it might be of interest to all Tado X users.
-
Tado X and Vitodens 050-W BPJD OpenTherm
Hello, Today I received and installed Tado X and Bridge to control my Vitodens 050-W BPJD. I used the cabling suggested by the app Relay pin NO/COM and it works. Later I found this post here that seems to confirm the boiler supports OpenTherm. My questions are: 1 - do I have to move cables from Relay to OpenTherm…
-
Collegamente IMMERGAS VICTRIX TERA V2 28kw con Tado
Volevo capire se è possibile collegare la mia caldaia IMMERGAS VICTRIX TERA V2 28kw a sistema Tado V3+ mendiante uscite digitali OT Opentherm e quindi in modulazione.
-
Issues installing Wireless Temperature Sensor X
I have bought the Wireless Smart Thermostat X Starter kit, I've installed the programmer unit (Thread Border Router), but when I go to install the Wireless Temperature Sensor, I keep on getting error messages. Can't Reach Google or Can't find device. I have tried uninstall & re-install, changing network to 2.4 ghz, various…
-
Change hot water to heating
Long story short after having an election in discovered that what we were told was controlling the water heater actually controlled the upstairs heating. Is there a way to change the water "room" to be just a normal heating so we can link it to the smart thermostat?
-
Changed broadband & bridge will not connect
Hi, I have just changed my broadband provider and set up a mesh system and the bridge will not connect to LAN. Do I need to reset it and start again? There appears to be no way to change the network name and password.
-
Tado V3+ Temp Control Issues
Dear Community, Upon installation in mid November 2024, we set our upper (19°C) and lower (17°C) limits for the respective rooms in our house, and for about 2 weeks it went okay. Since the start of December 2024, it has been a proper mess. At random time intervals (outside our set schedule), Tado will heat up a room way…
-
Please help - new wired thermostat
we have I think a faulty wired thermostat so want to replace. We bought a new one and connected it just the same as the old one, removed the old device from the app, added the new one and it didn’t work. The setting were the same as the old one R01 HC01 HW ticked and EK ticked. It on the extension kit the hot water light…
-
Matter Version
Which version of Matter does Tado X currently support? My device firmwares are currently: Thermostats - 243.1 TRVs - 247.1 Bridges - 245.1 But without a public changelog, there's no way to see what any updates include.
-
Caveat Emptor - Degraded Experience with Tado X
I've just upgraded by 13xTRV Tado V3 system to X, and can't help feeling that apart from the technological step forward in terms of Matter and Thread, I've actually taken a step backwards in terms of overall user experience as I find more and more options I'd taken for granted for 10 years are now missing. I actually…
-
Smart Thermostat disconnects
Hi We have been running with Tado for a year now and generally very pleased but one smart Thermostat keeps disconnecting (i.e. marked as Disconnected in the app). I changed the batteries, removed and re added it to the Tado network and it worked a while but then happened again. Next I swapped the failing thermostat with…
-
wiring tado x thermostat with gas bolier (protherm)
Dear support, I have purchased Tado X smart thermostat and trying to connect it with my gas bolier: Protherm Gepard Condens 18/25 MKV. I have tried to connect it according to your instructions in tado pro for installers app, However it is not working at all and gas boiler is always heating. can you maybe help or advise? my…
-
Tado X set up question - UK home
Hi, I’m looking for some help on whether the tado x would work for me in my UK home (5 years old, new build). I currently have the following set up: Ideal Logic H18 boiler, Separate hot water tank (1st floor), Danfoss TP1 thermostat wired (heat and hot water - ground floor), Danfoss TP1 thermostat wired (heat only 1st…
-
Energy IQ update...
Hi, so Energy IQ was pretty good when I started with Tado (4 years or so?). It then went lottery mode where it would just show nonsense. Has anyone else noticed them fixing it? The December numbers are within 80 kWh! That is pretty impressive…
-
Wireless Themostat on hot Water Channel
Can you add a wireless thermostat to the hot water channel andcontrol the zone this way? Appshows it setup this way but the thermostat does stop the zone when temperatureis met.
-
Can wired thermostats be used wirelessly in 2 zones?
Hi All, I purchased just before Christmas, a wired thermostat and the wired starter kit V3+ I intended to use these via existing wiring but I cannot do this as the wiring done by the house builder is CAT5 data cables and my wife does not want new cables put in as this will mean holes/channels in the walls. So I'm going to…