-
For some reason I can’t edit or delete my smart schedule any ideas?
I can go into each day change the temp and toggle heating on/off but can’t edit times. I can also add another time block but once added can’t edit times. The only reason I put smart schedule is because during the middle of the night frost protection goes on even though I haven’t told tado to turn the heating off.
-
Use with existing timer/controller
Had a new Ideal boiler fitted and opted for a tado room thermostat with thermostats on most radiators. I have set the wireless room thermostat to control everything, but then added thermostats to radiators. They all operate independently, but I am worried that the room stat is being over-ridden by the old timer. How should…
-
[User Feedback Request] Quick Actions - Boost Heating
Hello! As you may know we recently launched Quick Actions as a beta feature (You can try it on my.tado.com). We’d like to receive some more feedback on the “Boost Heating” Quick Action, an action that currently heats up all rooms to 25° for 30 minutes. We learned that some of our users would like to change the temperature…
-
Bridge not powering up
Hi guys. My Bridge is not powering up. I’ve tried changing the power lead and plug (I know they work) but still no joy. I’ve contacted Tado support but it’s been 3 days now. Any suggestions???
-
Boiler doesn't fire after simultaneous demand for heating and hot water
Let me explain the setup I have and what's happening. We have a Vaillant EcoTec boiler and a hot water cylinder. There's a Honeywell controller with a valve that controls whether the hot water from the boiler is running through the rads, the cylinder or both. So, all our hot water is pre-heated and stored in the cylinder.…
-
Understanding Weather Adaptation?
Hi, I have 3 radiators in a 62 square meeter apartment. All radiators is next to windows and there are no other thermostat in my apartment, I've got Weather Adaptation enabled. But I have a hard time understand how it actually works, all of my radiators are set to 18C without any "Smart Schedule"., they all measure 22C. MY…
-
Opentherm during an internet outage
What happens to modulation during an internet outage? Is modulation calculated locally or remotely? I noticed there is a longer delay between a request for heat and boiler starting when using Opentherm compared to relay. Wonder if this is due to remote calculations?
-
Leg adapter
Hello Somebody needed to mount a "leg adapter" for the TRV (see images), I cannot find it online. The one I have from my previous valves is not valid for Tado TRV. Did you buy a similar one valid for Tado TRV?
-
TRV Body (M30 x 1.5)
Hi all, I'm looking for links to the good quality TRV bodies. I need to overhaul 13 radiators from standard tap style valves but I can't find correct matches. Preferably don't want to add adapters so looking for the prescribed M30 x 15mm size. Based in Ireland FWIW. (i.e. found this on amazon, but it doesn't state size:…
-
Re: Gestire 2 impianti con lo stesso account
-
Smart Radiator Thermostat HomeKit issue
Hi, I have 3 radiator thermostats linked to a wireless temperature sensor in my kitchen. One of the radiator thermostats is not working with HomeKit/is giving an incorrect temperature compared to the others even though the “measuring device” for that room is the wireless temperature sensor” and not the individual radiator…
-
Smart Radiator Thermostat HomeKit issue
Hi, I have 3 radiator thermostats linked to a wireless temperature sensor in my kitchen. One of the radiator thermostats is not working with HomeKit/is giving an incorrect temperature compared to the others even though the “measuring device” for that room is the wireless temperature sensor” and not the individual radiator…
-
Re: iOS app 6.4 not working on iOS 14.5
-
iOS app 6.4 not working on iOS 14.5
Hey folks, hope you're all keeping safe and well 😄 Has anyone else noticed that the iOS Tado app won't open at the moment? I know I'm running a beta version of iOS (14.5 build 18E5140j), but Tado is the only app I'm having issues with! Cheers, Aaron
-
Vaillant ecotec plus 618 system boiler what to do with the wiring box?
I have had Tado for a few years wired using 240v to the wiring centre in the airing cupboard for CH & HW using the extension kit. The boiler is in the garage. its a Y plan system. Everything works fine at moment. Just want to understand what benefits of ebus is and how to do it? EXTENSION KIT Have just had fitted a new…
-
Which wires to connect?
We are replacing our DanfossTP7001 I have taken the old unit off but there are only 2 wires connected, the Hcom and Hon with a yellow and green one not connected to anything any ideas?
-
TP9000, TS2 and TP4000 replacing with Tado
Hi, My Existing setup: TP9000 in utility attached to Ideal Logic+ Heat 15 combi boiler. TS2 sensor in dining space. TP4000 in Master Bedroom upstairs. I wish to get multizone heating setup with: Tado Smart hot water control unit replacing TP9000, getting rid of TS2 sensor as will be using Tado wireless thermostat. Wish to…
-
Continuous heat called when set to 21.3c
Why does the tado thermostat keeps calling for more heat when ever temperature is set between 21.1and 21.4. So for example if the temp is set to 21.3 or 21.4, it’s still calling for more heat until it reaches 21.6. Should it not stop until the temperature is below 21.4? I dont have this problem when it’s set to 21c or…
-
Radiator thermostat batteries die without warning?
Hi Folks, I really hope that tado’s technical support team pick up on this! I’ve had 3 separate radiators thermostat batteries die without warning. They still show up as fine in the app. The only way I noticed was by touching the radiator and then manually turning the thermostat to be greeted by the “[ ]” image. Great! So…
-
Radiator thermostat (knob) measures completly wrong temp
since a week (or more?) the know in granny's room does not measure the correct temp heating is turned on in schedule as of 8 pm till 10:30 pm, starting most of the time at 12 degrees, heating to 19 degrees but after 2.5 hour temp is not reached according to the radiator thermostat so radiator is open for heat, room is way…
-
My smart thermostat & extension kit still shows as needing to be installed within the app???
Hi, I was unable to follow the installation instructions from the app / website for our extension kit as the wiring did not match. I have installed it following instructions from support but when I look at it within the app both the extension kit and the smart thermostat both just show the Installation instructions link…
-
Smart radiator thermostat overrides main thermostat
I have my main thermostat in a corridor and a smart radiator thermostat in a living room. If someone manually reduces the temperature of the radiator thermostat, it turns off the heating (combi boiler) completely , even if the corridor is colder than the main thermostat setting. Have only spotted this in the morning when…
-
[User Feedback Request] Quick Actions (formerly Global ON/OFF)
Hi everyone, We just launched the "Quick actions" feature via my.tado.com (web app) We currently are looking to receive some user feedback before we also release this to the iOS and Android mobile apps in the next weeks. The question for the poll: How understandable was the Quick Actions feature for you when you first used…
-
Two zone valves - Combi boiler
Hi there I've recently re-wired my house. I have a Combi boiler installed to control the hot water on demand, and then two zone valves for upstairs and downstairs. From the boiler, I've run a 3-core cable to two thermostat locations (upstairs and downstairs). What would I need to buy to allow two Tado stats to control the…
-
3 Smart Thermostat and 3 different Firmwares
I've just bought a starterkit v3+ and 2 additional smart thermostats. Now if I check the firmware, I have 3 different ones... Firmware: 76.1 Firmware: 51.7 Firmware: 67.2 Why is that? Shouldn't they have the same version? btw: With version 67.2 I have a lot of no remote access issues, although it's in the same room. The…
-
Help needed, Heating constantly on.
Hi All, I have set up the smart thermostat / wireless receiver (hard wired to the boiler) and internet bridge. For some reason I am not able to control the temperature from the smart thermostat nor the app. Is this a simple case of not being wired correctly (I believe it’s all wired as it should be) or has anyone…
-
Help needed, Heating constantly on.
Hi All, I have set up the smart thermostat / wireless receiver (hard wired to the boiler) and internet bridge. For some reason I am not able to control the temperature from the smart thermostat nor the app. Is this a simple case of not being wired correctly (I believe it’s all wired as it should be) or has anyone…
-
TadoKit.TadoCloud.Error (11)
I keep getting TadoKit.TadoCloud.Error (11) in the iOS app when trying to update a temperature setting. Any ideas?
-
Radiator water temperature from boiler changed/limited
So a few days ago I noticed that my radiators were not getting as hot as they once were. Checking my boiler, it never get above outputting water at 40/41 to my heating system (hot water is working as normal). It was outputting much hotter water before. Tado is connected to my boiler via Opentherm and it seems I am unable…
-
Tado not reach set temperature
Hello I have boiler and heat all house by underfloor system. I set to heat temperature to 23 Celsius. But it reaches like 20,7 and stop. Never reaches my selected number. Manually I can heat up for example for 26-27celsius..