-
Bleeding radiators with trvs
Hi May be a daft question but I have tado TRV’s on all my radiators apart from one. If I want to bleed my system is there any special steps I need to follow? Do all valves need to be set to high temp to allow water to flow in?
-
False Nobody at home anymore & Unable to control Rads together?
Evening folks, This evening I took the plunge and connected by 1st smart heating setting, consisting of: Wireless Smart Temp Senor 8 x Smart Rad Thermostat Wireless Receiver & Internet Bridge Setup went surprisingly smooth - however I have 2 annoyances which I would really appreciate would direction of please? 1 Constant…
-
Devices missing in Home app
I have the following case: Tado app and devices installed successfully in one house Another account created (as instructed by Tado via e-mail) and installed devices in another house While being logged into 2nd account in Settings->Homekit I still see devices added to first house only. I don't see any of the devices…
-
Oil boiler. 3 channel controller/2 wired stats
Hey folks. Quick question about the system I intend on setting up. I have a dual fuel system into a wiring centre but essentially controller operates as a standard 3 channel 2zone + HW. Two wired room stats and one HW tank stat but we don't hear our hot water from the boiler so HW from the controller is obsolete. My…
-
Until You Cancel
Hi, Strange things happening here. Since the introduction of then new app, that allows also for the room reordering my temperature in the 'living room' switches to 20 degrees C UNTIL YOU CANCEL. but nobody touches the app in the morning and all is run by schedule all day ... any ideas what could be the reason? I first…
-
Extension kit shows no access
My system is currently in away mode. I have just checked and all my radiator valves except one are showing no remote access. However sharpen I look at the system it appears that the only device without access is the extension kit. That is the only device with the red exclamation mark. It would appear that it is the…
-
VB Web & Software Solution
-
Tado app says "heating to", but system is not heating at all. Temperature keeps dropping.
I have the Tado system now for several weeks, but I'm not happy with it at all. Many times I find my rooms or certain rooms either to hot or to cold. The information that the app provides is incorrect many times. In this case, I'm working sitting in a room and noticed that it's getting colder and colder. Via smart…
-
Cloud light flashing on Bridge
Hi, I have my bridge plugged into my Sky router. I have also tried it in the Sky Q mini box. I cannot get the bridge to connect, the cloud light just flashes constantly. I have tried EVERYTHING on the Tado website, changed ethernet cables, powering down etc etc etc. I can't fix this. I am waiting for Tado to email me back…
-
How to get your forum question answered "properly"
Just so you all know - on this forum - your question will be marked "Answered" as soon as anyone replies. Even if the reply is just "I have the same problem with my Tado" This can make it look like all the issues are solved immediately! Solution: Make sure you click "no" on "does this answer your question" button on any…
-
New to Tado
I very recently had the Tado system fitted along with a new boiler that i desperately needed. Now I've had a few days with Tado and just finding it quite complicated, for me. The bridge seems to shut of after 12 hours, thus the boiler doesn't come on at the desired time, or the hot water. surely you can activate the bridge…
-
Read target temperature? Set opening of valves?
Dear readers, I setup a small monitoring to understand how tado controls my radiators: Target temperature for living room was 22°C for the whole time window. Why does it open and close the valve all the time? The trvs are only mounted for around 48h so I wonder whether I will be able to observe a learning effect? Is there…
-
Tado and LG Air Source Heat Pump
Hi I have Smart TRV's for all the radiotors at the moment but I am replacing my heating system with an LG Terma-V monobloc Air Source Heat Pump. https://support.tado.com/en/articles/3387240-which-heating-systems-does-tado-support On here it says it supports ASHP's for heating only but doesn't give any details of which, Any…
-
Tado support are slow to respond
Has anyone else struggled to get a response from support at Tado? We lost all remote access (and therefore heat) at the weekend and the emails from support have been non existent. Very disappointing
-
Starter Kit - Wireless Smart Thermostat V3+
I would like to add to the Starter Kit, all of which is downstairs, and understand the temperature upstairs. The Tado Wireless Temperature Sensor sounds ideal, but it suggests this works in conjunction with the radiator thermostats (which I don't have yet). Would this sensor simply let me know the temperature upstairs?
-
Extension kit
The extension kit can work as a switched live or low voltage digital ? If it is in digital mode, what turns the pump on and opens the zone valves, is it performed by the boiler ? My system is a normal S plan system and I know that I could use the extension system in relay mode but I want to use the digital control to…
-
do wireless thermostats communicate with radiator thermostat
am i able to connect wireless thermostats to radiator thermostats for better control
-
Tado installation with district heating
Hi Please bear with my potentially stupid questions 😊 I've moved apartments and I now have hydronic underfloor heating connected to district heating. I'm interested in replacing the old Danfoss system with Tado. There are all kinds of problems with the wireless thermostats and I want a more smart system. I've spent hours…
-
Opentherm on Ideal Logic Max Combi C30 and hot water
Hi All, Does anyone with an Ideal Logic Max Combi connected to the Tado via Opentherm managed to understand how the Hot Water tile in the tado menu is working? I have been told by the support that "turning on the water" is supposedly turning on the "Preheat Domestic Hot Water" but when I go and look at the Display on the…
-
Do I still need a Smart Thermostat?
Hi all. Noob question...; Old set-up: Worcester Greenstar 30CDi system Boiler Megaflo unvented hot water cylinder Wired Honeywell ST6400c dual channel programmable timer Wired Honeywell T6360b room thermostat (in the entrance hallway) Various radiators all over the house with TRVs Current set-up: Honeywell programmable…
-
Alexa/Echo skills issue? Light off command triggering heating off instead?
Hi, it only started to happen today. I have "Nursery" set as the room name in Tado, and "Nursery" as room name in Hue. It works before when I called "Alexa, light off in Nursery". But tonight, all of a sudden, it is turning of my heating (tado) instead of the lights. I tried deleting all the devices in my Alexa app and…
-
Why does the Tado not turn off my boiler
The Tado does not turn off my boiler even though everything on the app is turned off
-
worcester bosch greenstar 30i with greenstar comfort i rf
Hi, I don't have a wall plate as my current controller is mounted on the boiler itself (see pic) so will I have to run a cable from the boiler to the Tado extension kit? If so will the cable come with the purchase? Is this a simple job? (I have basic diy skills) Any help please
-
What's my optimal set up?
Hi all I am looking to get Tado but want to know whether what I want is possible. Essentially I want to control the temperature in every room. Ideally, I would want a smart TRV on every radiator to control when each radiator is on or not. I currently have three thermostats - 1 for the downstairs heating, 1 for the upstairs…
-
Viessman 200-W and Tado wireless V3+ starter kit connection via KM-BUS
Good morning, Yesterday the plumber was trying to connect the Viessman 200-W and the new Tado Wireless V3+ starter kit. All Tado parts worked perfectly (bridge, wireless receiver, and the wireless sensor) however he was not able to connect the Viessman 200-W and the Tado via the Km-Bus (digital bus). He called Tado…
-
Extension Kit Single Blinks Every 2 Seconds
My Extension Kit LED blinks once every two seconds. I can't find any guidance as to what this means. I am experiencing no CH or HW unless I manually override the boiler.
-
Setup change
I started off with a simple wired thermostat starter kit and a set of thermostatic radiator valves to control my combi boiler and house heating. I then moved house and had a different setup. I had to result to buying a wireless thermostat starter kit as it had to control hot water and heating. I however did not start my…
-
Internet bridge firmware updated to 60.8. Anybody knows what changed?
Hi all, I just noticed my internet bridge has moved from firmware 60.7 to 60.8. Does anybody know what got updated? I have no clue where to locate change logs & such for tado.
-
How to connect with Apple Homekit
Hello, I am trying to connect the Tado Bridge with my "Home" on my iPhone. So I go, as instructed, in to the "home" app, and then choose "add accessory" and then scan the code on the bridge. But the Tado bridge does not appear as an accessory that I can add. I previously added successfully a Phillips HUE bridge, so I know…
-
Various issues with Tado system - can anoyone advise?
(long post alert) Hi all, I got this around a year ago. I'm extremely disappointed with it so far and I'm really regrettting the purchase. I have a smart thermostat and six smart radiator valves. I thought it would be great to be able to remotely control heating and especially the individual radiators in each room.…