-
Advice on replacing a British Gas UT2 Programmer with the V3+
Hello Folks, I've been doing some digging and looking for some advice on installing the V3+. I've got a combi boiler (Worcester Junior 24i), programmer is just for switching heating on and off. Hot Water is on demand. Could someone advise on the setup for the V3+? I've a power switch that cuts/provides power to the…
-
I can't log in to the TADO app (Android).
Hi, I purchased TADO products and installed the Tado app for Android. I have created an account that I log in to via the website, but in the app I am still stuck on the screen where I enter my login details and after submitting them nothing happens. I tried logging in on the same WIFI network on my tablet in the app and it…
-
How to set Wireless Receiver to combi boiler mode?
I have installed my wireless receiver and it’s working great for central heating, but it’s attached to a combi boiler so the hot water function is not needed/doesn’t exist. The hot water function appears in the Tado app and until I set it to permanently off the hot water relay was on. Following the consumer/amateur install…
-
Tado Air Comfort Settings – are they customisable?
I am fed up with my Tado thermostat app telling me my living room is too cold and too humid. It's not. It's 18.2 celsius and the humidity is 52%. This is absolutely comfortable for me. I live in London in a building built in 1760. Yet Tado 'Air Comfort' tells me I'm too cold/too humid. Why can't this be made customisable?…
-
Can’t add 2 houses?
How can I add my 2 separate properties on to one account it doesn’t seem to allow me to do this
-
Let users choose which rooms to 'boost'
I’m sorry if I’ve missed this, but how on earth can I hit Boost and boost just a set of rooms rather than the ones which are not used? This is such a no-brainer feature, and when I search I can only find hack-arounds via IFTTT ( just discovered now not possible ) I can only assume that this is me being thick? Feature =…
-
smart thermostat actuating
smart thermostat actuating , with app and manually , but boiler not switching on , all other 9 smart thermostats working
-
OpenTherm/Modulation of Nefit NXT HRC24 CW3 doesnt seem to work with Tado X wireless receiver.
Hi, I have a question regarding OpenTherm/modulation on my heating system. I am suspecting that it only works on Relay and not OpenTherm. I have installed everything according to the installation steps in the Tado app. I have made the following Observations: When my Tado x heating devices require heat but only 1 out of 3…
-
Tado X Installation Issues (UK)
I’m moving from a Honeywell Evohome system to Tado X. Unfortunately I’m having issues. The installation of the Wireless Receiver, the Thermostat and the 1st 4 radiator valves went fine. Now the next 3 will not pair. It seems that it could be a range issue (but the distance is not far). When pairing I never get the…
-
Tado for water underfloor heating?
Hello, I would like some advice. I have centralized underfloor heating. Currently in each zone, there are 5, I have a standard thermostat from Fantinicosmi wired that I would like to replace with 5 tado. In this way I can regulate the temperature between night and day. Do you recommend tado? Does anyone have the same…
-
Eccessivo assorbimento termostato smart tado°
Buonasera sono in possesso di un termostato Tado° Smart Thermostat mod RU 1552420352-2708-0. Ebbene le tre batterie si scaricano quasi immediatamente, ho controllato l'assorbimento attraverso un alimentatore professionale con 4,5v l'assorbimento e di 0.39 ampere (390 ma). Mio figlio ne ha uno identico provato con lo stesso…
-
Zones and Devices in the Tado° X API
Hi everyone ! I have created lately a Python script to retrieve the temperature of the Tado° X Devices in my home. This script seems correctly setup since I manage to get /me information and based on my home_id, I manage to get the home_details. When pushing forward and requesting the deviceList…
-
Tado V3 pump over run?
I am very happy with my V3+ system. I started by replacing my old Honeywell wall thermostat with Tado wired thermostat. My system is a classic 90’s Y system with Honeywell 3-way valve and programmer I set hot water times via the Honeywell, and CH to constant and let Tado do its thing. Everything is basically as it was…
-
Is the geofencing option in schedule timeblocks no longer available?
I used to have an option to make a timeblock not affected by geofencing with my Tado V3+. I upgraded to Tado X and the option is not there when I create or when I edit timeblocks. Anyone else? Anyone know a solution? Logging out and then in did not help for me like for others in other similar posts. In case it is relevant,…
-
Questions about setting up Tado
Thinking of changing my heating system to Tado and I have a couple of queries... I have a Vaillant EcoTec Pro which I have found out uses Ebus and therefore only V3+ is compatible. Are there any downsides to using V3+ in 2024/2025 and going forward? Another issue I potentially have is that my boiler is located in the…
-
extend matter over thread functionality of the X thermostatic valve
Great device, and it connects flawlessly with the thread network on my home assistant. So well that I now have fitted them in all the house. Ahead of the competition. There are a few functions I am missing though: I do not get to see the battery level over matter, nor the option for a firmware update (which might be…
-
Upgrading from V3+ to X issue
Here's hoping you can help with my issue. I'm a long time user (9 years) and have recently used the upgrade offer to change to X. I've purchased the wireless receiver and thermostat kit and 8 trv's. AFAIK the receiver works as a thread border router and so I don't need the bridge X The receiver is wired to the boiler using…
-
Hot water away setting
Can anybody confirm what the toggle switch on Hot Water setting in Away mode means? I'm guessing it means if switch is on, the hot water will continue in same settings as Home. If off, hot water set to constantly off. Is this correct?
-
Tado X and leaving my Drayton LP522 hot water programmer in place
Hi all, I am upgrading to Tado X starter kit with a wireless thermostat including hot water controller (just arrived), I am currently on Tado V3+ with only the wired thermostat and some room stats. I have a Vaillant Ecofit pure 425 boiler with a tank, vented system, it has a Drayton LP522 programmer for the water. so my…
-
Does the increased boiler firing/stop cycles prematurely age the boiler?
Hi, Does the increased boiler firing/stop cycles prematurely age the boiler? I believe that a boiler, and it's constituent parts, have an MTBF that cumulatively set an MTBF for the boiler in terms of number of firing cycles (affected by lots of other factors, to be sure) but nevertheless, doesn't the TADO controller…
-
Tado API Documentation
Hi Team, I’m currently working on integrating Tado into a project and was wondering if you could share the API documentation or guide me to where I can access it. Any additional resources or tips for developers would also be greatly appreciated. Thank you in advance for your assistance! Best regards, Andrii Tymofieiev
-
2 Zone Heating with Combi Boilder
Hi All ! I am recently moved to a new build, which has a combi boiler. There are 2 heating zones, one on ground floor, and the other one on the first floor. I want to put Smart Ratidators to control heating for each radiator individually. I am newbiee here… don't know lot of stuff. Can someone help me with all stuff I need…
-
Exclude some zones from auto away
Is it possible to exclude certain zones so that they don't shutdown when I'm away? I don't mean buy forcing manual mode because I'd like to preserve the different setpoints through the day
-
Ifttt replacement with Google Home
Every evening when we go to bed we call a Google Home Routines that sets all the temperature settings to 15 degree in all the rooms. I want to have a warm house the next morning. For this reason I had a IFTTT routine scheduled at 01:00 am with the task "all rooms will be controlled by tado° again". Is it possible to have…
-
Multizone - UK new build
Hi there, We have moved in to a new build in the UK and I'm looking for help with setting up tado and if I have the current correct kit. We currently have 2 wired thermostats which control each zone independently so that one can be one and the other off and I would like the tado to mimic the same (we have a combi boiler…
-
Strange change in heat demand of UFH
Hi, I wish to share rather strange behaviour of thermostat controlling UFH. Here is an example of how heating looked like before changes made with Tado support: And here is how it looks for last few days after some algorithms correction made by support: Despite what's on the chart - UFH valve/pump isn't turned on all the…
-
I have no heating or hot water as the system does not seem to be communicating with the boiler. Help
I moved into a new house that has underfloor heating downstairs on a Polypipe system but upstairs has 3 radiators (1 in each bedroom) with smart radiator thermostats, a smart thermostat on the landing and an Extension Kit in the cupboard with the cold water tank. The Internet Bridge is plugged into a BT Home Hub. The…
-
Is hot water schedule maintained even when smart thermostat battery is discharged?
Hi all, Our hot water schedule was linked to the smart thermostat. I have misplaced the smart thermostat and cannot find it and its battery has discharged. Hot water is now "offline" in Tado app and I dont see it come on on the wireless receiver at scheduled time. I still get hot water in shower/taps but its just warm even…
-
Installing Wireless thermostat kit v3+ on a Vaillant EcoTec Pro24 Boiler with SALUS Controller
Disclaimer: I am not an engineer, nor am I particularly skilled in anything plumbing or electrical. Essentially I'm layman with everything to do with boilers. I do however have a basic understanding of electronics, and I do like taking things part and solving an interesting problem Recently, I bought the Tado Wireless Kit…
-
Can Intergas Kombi Kompakt HRE work with Tado X
Hi, I bought an tado x introduction package (bridge, thermostat and knobs). I have an older intergas boiler. I only saw after it came in that Tado recommends the v3 for Intergas. But does it still work with Tado X (but maybe limited?)