-
Will this set up work with Tado X
Hi everyone I'm pretty new to Tado and after 2 months of living with the X system, so far so good. But I'm looking to add some more kit and would appreciate some advice. I have 4 Tado X wired thermostats, one for each floor of my house, each controlling the valves to my combi boiler through the control panel / main zone…
-
Tado X Wireless thermostat: temperature sensor instead of climate sensor in Home Assistant
I installed my Tado X devices in the Tado App. I have three wireless temperature temperature sensors I want to share to the Matter Server in Home Assistant. The First one works fine, it sees the sensor as a Thermostat device (see below Node 1). And I can control it in Home Assisant with the climate sensor. However the…
-
Hot water boost button doesn’t work?
Am I being daft? I thought the right hand button on the controller is supposed to boost hot water for an hour. If I press it the light goes out as soon as I let go. If I hold it down I can hear the boiler start, but the second I let go the led goes out and it stops. If I go in the app I can then press boost hot water and…
-
I have a tado smart thermostat and my radiators have smart thermostats.
I have a tado smart thermostat and all but one (the bathroom ) of my radiators have smart thermostats and sometimes the smart thermostat asks for heat when the radiators do not. Consequently the boiler is running to unnecessarily heat the bathroom towel rail. what should I do? I’m thinking the smart thermostat is not…
-
How to have geofencing set Away temperature when the Home temperature was manually overridden
I have a v2 Smart Thermostat running a simple schedul that maintains a daytime temperature of 20c. I have Away mode set to maintain a temperature of 10c. Scenario: I'm at home and manually increase the thermostat temperature to 21c. Some time later I leave home and Tado correctly sets geofencing to Away mode. However, it…
-
Tado X - when using google home or apple home - should I delete all automations from Tado app?
I just bought Tado X wireless thermostat, wireless temp sensor and few radiator heads. Now I have it all set in tado app, but I would like to make control and shedule on apple or google home ( didn't choose yet which one ). To avoid conflicts should I delete all temp and time settings from tado app before setting it all up…
-
Tado X wireless receiver connected to WIFI but not connecting to internet - Offline in the app
I woke up today and found my tado wireless receiver offline. It initially appears to connect to WIFI and internet but after a few mins or less the left wifi indicator remains positive, the middle one goes out and the right one pulses. The device has the latest firmware 246.2 but remains unresponse and offline in the app. I…
-
Symbol ?
Anyone know what this symbol represents? Seen a few suggestions …but nothing concrete
-
Multiple Home
I’ve just bought a New Tado kit pour a second house. I understand that Tado app can’t manage multiple home without changing account. I’d like to known if it is forseen to upgrade app to multiple home capacity ?
-
Tado°X compatibility with other Matter devices (outside of temperature control)
Hello, I have just set-up successfully a Tado°X system based on Matter. Now I would like to add other devices which are not related to heating or temperature control for two reasons : To expand the Matter network and make the connection to the most remote thermometer more robust. Control other appliances in my home through…
-
Tado Wired Smart Thermostat
Hi All, Recently procured a Tado Starter Kit v3+ to replace a ESi ESRTP4RF+ thermostat. Just need a little help with the wiring. The ESi wiring attached has 4 wires Live, Neutral, COM and N/O. Where do these go in the Tado? Thanks
-
tado° Server Problems (November 2024)
My system has been setup for almost 2 years now without any major issues but in the last couple of days the response to a heat command or a simple blink is taking ages. I tested it throughout yesterday evening and noticed that as the evening progressed the response times became quicker and by midnight they were almost…
-
Bug: offline schedule clashes with wireless temp sensor?
In a room with a V3+ TRV and a wireless temperature sensor, the new offline schedule feature seems to cause continual calls for heat (fires the boiler) when a TRV goes offline. This morning one of my TRVs went offline for a couple of hours (no clear reason, it's fine now). This TRV is in a room with a wireless temperature…
-
Temperature sensor accuracy
Is the temperature sensor accurate, it consistently reads 2 degrees c colder than it actually is. Is there a way to calibrate it properly?
-
Geofencing not working
I also have the same issue with geofencing not working. I raised this issue with Tado and got the following response Thank you for your patience. The target temperature increased 1 hour before you were home, it was just not enough to trigger a heat demand before 7:23PM. This means you were moving faster than the App knows…
-
Thermostat not controlling the boiler
I have installed the wired thermostat but it doesn’t seem to control the boiler. I set a target temperature, but the boiler does not shut off once the target is reached - it carries on heating and pushes on to higher temperatures. This is true in the smart schedule and manual settings. Can anyone help or guide me with this?
-
V1 Installtion
Hi I have the original V1 beta which I have not used since probably 2019. I powered it up today and it said all components were offline. I then deleted the home so that I can add everything back again. But it's asking for the serial number and 4-11 digit code. I have the serial number but where do I find the code?
-
Upgrade tado app for more Homes, connection with external open window sensors
I have two Homes, and I installed new thermostats on tado° X radiators in my home. I have a V3 system in my company and I had to create a 2nd account. This causes complications especially with Geofencing!!! When will the new version of tado° for multihomes be available? It would be good if the tado° app could respond to…
-
Altantic Boiller and Tado wiring
Hi everyone, I'm in the process of replacing my old thermostat with a wired Tado V3, but I'm running into an issue. The old thermostat had just two wires connected to it, and following the manual instructions, I connected these to the + and - terminals on the Tado (on the right-hand side) and set the correct settings…
-
Tado to Worcester Bosch GreenStar 30i Digital Interface EMS Connection Bus (Working Setup Attached)
Hi below is a working setup for a Worcester Bosch GreenStar 30i Combi Boiler using the Digital Interface EMS Connection to a seperate wireless tado thermostat in another room I hope others find it useful Basically I removed my old Hive connection and receiver altogether from the boiler before i started on setting up Tado I…
-
House WIFI and Tado system
Hi. I am confused and cannot seem to find an answer to my question as to if the Tado system does or does not use your home wifi. I have a Tado Bridge connected to my BT router ethernet port, I have a thermostat, and a Wirless receiver near the tank in the loft. If my home WIFI generated by the BT Hub goes down I cannot…
-
Thermostat Receiver not communicating with boiler
Hi there, we had a danfoss receiver installed previously and we replaced it with Tado. We followed the same wiring based on how the danfoss was wired and for a couple of days it was working fine. After 2-3 days the Tado stopped communicating with the boiler and now when we boost the heating on the app or turn on the…
-
TRV Compatibility
Hi, I have the V3+Thermostat with an additonal stat. I want to add some TRVs. Would the Tado V2 TRVs work with what i have? Thanks
-
What happens when last valve closes at the end of heating cycle?
Hi! Setup: all radiators with tado thermostatic valve + thermostat to control the heating start/stop Scenario: heating is on, last thermostatic valve reaches set temp and closes → thermostat should switch the heating off Heater PoV: 'stop' signalled from thermostat so burner goes off, and the water pump kept on until the…
-
SOLVED: tado setup for one boiler with two heating circuits (UFH and radiators)
Slightly odd one perhaps but as I spent quite a bit of time researching whether tado could work for my home's heating setup and didn't find any clear answers I wanted to post for others to see that it is possible -- and how! Original setup: one boiler (Vaillant EcoTec Plus 838 + two heating circuits, one for the underfloor…
-
New setup with combi, rads and UFH - advice needed
Seeking advice. Have been a happy Tado user with a conventional heating system controlled by smart thermostat and trv’s for radiators and extension kit to add hot water control. Now moving to a combi boiler with radiators and UFH and ideally want to use Opentherm by connecting the extension kit to the boiler to control.…
-
Controlling two radiators in a room
Hi. I have just installed Tado X. I have a room with two radiators, each of which has a wireless smart thermostat X, but there in no wireless temperature sensor X in the room. I want one of the radiator thermostats to control the temperature of both radiators. In the old Tado system, I could set it so that one of the…
-
Buderus logamax plus gb072 (RC310)
Good day, I want to buy a Tado smart thermostat. I have a gas condensing boiler at home, brand Buderus logamax plus gb072-24k. I already bought one thermostat of another brand, which unfortunately could only On/Off, and I need it to communicate with the boiler also based on changes in the temperature of the circulating…
-
Has anyone found 'early start' worth persevering with?
Hi, Day 4 of our tado system up and running here. A few teething problems but so far OK. I've done some forum searching now and see the 'early start' function does not get a lot of love! So far the rooms I've had early start activated on (I've followed advice is earlier threads and not used it in smaller rooms - only in…
-
Changing internet provider
I am changing my internet provider do I have to do anything for Taxi to operate