-
Battery life
Hi, I installed my tado system 3 weeks ago and one of the TRV’s has flagged up as being low on battery! Surely this isn’t normal
-
Issues with pointing to the right controllers
Hi all. Sorry if this has been asked I’ve been searching all night and lost hope. I have a wired thermostat that does heating only and an extension kit on the boiler for hot water. The thermostat should control the heating and it does however the smart radiator adaptors thing the heating controller is the extension. I…
-
Boiler on constantly
Hi, newby here so be kind. I have a Worcester Bosch Greenstar Ri system boiler. I have installed the wireless thermostat and programmer but have an issue with the boiler being on constantly. I see from previous discussions that this is not an isolated incident but my issue appears to be related to the old room thermostat.…
-
Lost outdoor air quality/ pollen count
Outdoor air quality and pollen count have disappeared, anybody know why? :/ :/
-
Underfloor Heating - Tado -> Wiring Centre -> Actuators
At present I have most of my home's heating and the hot water controlled by Tado but the underfloor is managed by a simple programmable thermostat. I would like to manage the heat to the underfloor with a Tado too. I need to use a wiring centre as this controls a pump as well at the actuators and also sends the message to…
-
Auto Assist Price Increase
Auto Assist price increased to €3.99 or €29.99. I like to buy this 3 out of the 6 months. More as just a guide. With the price increase. I don’ think I will be bothered.
-
Radiator smart thermostat VA01 features
Does anyone know (and can confirm) VA1 revision features the same as VA2? I have found information about Child Lock, but what’s about other features like Air Comfort and others?
-
Manual timer override via App
New Tado user here. Have been playing around and have a question. In the app I can set the behaviour to Timer and set a time for both the heating and hot water but when I switch either on via the app it doesn’t obey the timer interval and waits until the next schedule. Is there a way to have the app use the timer as with…
-
Can I see from the app if a radiator valve thinks it is open or closed ?
Another newbie question :( Can I tell from the app if a radiator valve thinks it is open or closed? Reason for the question is that I have Comap valves so need to select a pin to match physical dimensions and I'm right between two sizes. It seems that one of my valves is letting hot water through. So I want to check if it…
-
Do I need a radiator valve in a room to enable requesting heat from my boiler ?
Hi, new to Tado and the forum and can't find an answer for this anywhere. Here's my scenario: 1. Fitting Tado radiator valves to all but one of my radiators. 2. 3 radiators in my main living area will be grouped to one wireless temperature sensor 3. I planned to keep the radiator in my master bathroom on a trv set to…
-
Heating stuck off then stuck on!
Anyone else had issues this morning with the heating being particularly weird? Didn't come on this morning. Tado thought it had come on. As usual care and protect therefore useless. Reset the main thermostat and the heating came on when I forced it on with the boost rooms option. It wasn't coming on with just the schedule.…
-
How to replace a zoned Honeywell CM707 wired thermostat system to a Tado Smart Wireless Thermostat?
I have a Honeywell zoned thermostat system with an Ideal Logic Combi boiler. There is a wired thermostat in the front entrance room that controls all the hallways and the downstairs rooms and another wired thermostat in one of the bedrooms which controls all the upstairs rooms and bathrooms. These are controlled by the…
-
Bosch Worcester GreenStar 8000 Life EMS/OT control
Hi Im getting a new combi boiler installed, its a Bosch 8000 Life. I'm currently a nest user (3 zones) but im thinking about moving over to Tado for more granular by room control. Ive read conflicting things about both Nest and Tado being able to make use of Modulation on this boiler brand. What I'd idelly like is for 3…
-
Experience having Tado on radiators in pit?
Anybody has any experience with this? In my living room, I have 2 radiators in a pit/under floor level. They currently do not have a valve at all; they're on when the heating system is on, which obviously isn't very energy friendly when I only need heating upstairs later at night. I asked a professional to include valves…
-
'Done' in app's graphs doesn't work anymore
Since this week, when I check the temperature of one of my rooms in the app, when I try to go back, the 'Done' button at the right top doesn't work anymore. Android. Any idea if that's me or the app?
-
unnecessary hot water heating at the end of cycle
Hi, I'm curious if you ever experienced the following buggish behavior: the hot water schedule is set up to 7:00-7:30 and 20:00-20:30. The water temperature is reached after ~15 min, so the boiler is usually not heating when reaching the off time point. But when the off time point is reached after ~2 min the boiler starts…
-
Possible to add V2 smart thermostat to V3 system
Hi is it possible to add V2 smart thermostats to an other wise V3 system? V3 system has bridge valves & other smart thermostats? I have somebody offering the v2 smart thermostats that I wish to add into rooms which will act as a master device over the TRV valves
-
How do I turn hot water on when Internet Fails
Hi our system had been working normally, but after an upgrade to our service we lost access to the Internet. How specifically do I manually trigger the water to be heated? All I could do was to set the test mode by pressing the hot water button on the Internet Receiver. This would fire up the boiler for around 60 Seconds…
-
Fan speed in Google home
Hi I can control the heat in Google on my AC smart v3. But there are no fan speed control. The AC in Google home is stated as a Thermostat. What i have researched is that Google dont show Fan control for a Thermostat, only for Air Conditioning.
-
Possibility to install 2 wireless thermostats in two different zone to control the floor heating
Hi, I have a full Taco installation for years but after having moved in a new house, I have a problem: I have a floor heating with 2 zones : Kitchen and living room The floor heating is controlled some valves (sorry for my bad English) located near by the boiler. I would need to install something next to the valves that…
-
can I switch the heating on/off whilst not at home?
I'm thinking of installing Tado for my AC system at home. If the Tado is properly connected to wifi etc, and I'm not at home, can I turn it on/off or do I need to be connected to the home wifi, meaning do I need to be home?
-
Heating works fine, but Hot water 'offline'
Hi. I'm able to control the heating as normal online on my app. Works fine. But the hot water is showing as 'offline' so I can't control it. Can someone suggest how I can fix this? Cheers, Pete
-
Why can’t Tado send you an email alert when a room goes offline
I couldn’t find any old threads on this one. Does anyone know why Tado can’t alert you when a room goes offline? It can tell you about batteries being low. It can would be really good to be alerted in the same way when a room goes offline?
-
Tado Error 7168
I’ve spent the weekend fighting my Tado Smart AC v3 devices, all of which mysteriously stopped working on HomeKit simultaneously. I’m ready to throw them all out the window. I fixed three of them. The fourth one kept giving me an “Accessory Already Added” (I forget the exact wording) in HomeKit. So I followed the Tado…
-
Updating gravity fed to fully pumped
I am updating my heating system from gravity fed to fully pumped (S-Plan). My extension kit is quite old and only has a single button. How do I make the change?
-
V2 AC thermostat, V3+ bridge
Hi guys, V2 AC thermostat is compatible with V3+ bridge? with V3+ bridge?
-
Router light on Internet Bridge blinking (V3+)
Hello, I just got a Tado system and am trying to set up my internet bridge. I've tried to connect it to 5 different routers and even got the TP-link switch Tado recommends... still it will not connect. It never worked. What can I do from here? I cannot clear the Internet Bridge in my Tado app and start the pairing process…
-
Can Tado control my hot water?
I've just bought the tado starter kit. I have a combi boiler where currently I can set a programme for my heating and a separate programme for my hot water. I'm now coming to wiring up the tado receiver and seeing it might not accept the hot water wiring. Will that mean I can't programme my hot water as before? Currently I…
-
Worcester Greenstar Cdi Classic
Hi all I have connected a wired TADO thermostat to this boiler as per the TADO instruction and for a start 3 smart SRTs. All is working fine. the issue is that the wired thermostat is working in relay mode, and I was hoping to get it working HT-Bus (D17). I opened up the boiler with the intension of disconnecting the LR…
-
Hot water tank control
When the water tank is at temperature should the standard thermostat on the side of my tank tell the tado to click the hotwater to off and turn off the relay as when my hot water is on for 5 hours it runs the boiler that long!