-
Recommend Zoning Setback Temperature
As recommend by Tado and Heat Geek instead of going around the app setting what I think are good temperature differences per room - can there be a recommend setback temp that is variable depending on the temp I have set.
-
Smart AC Control V3+ air purifier function
Hi, some air conditioners have an air purifier function. can you add this function? info : tekno point skiv air conditioner with the RA1A2 remote control
-
Smart AC Control V3+ sending the temperature measured by the Smart Thermostat to AC
some air conditioners have a function allowing the remote control to send the temperature it measures. with my tekno point skiv air conditioner with the RA1A2 remote control, the function is called "I FEEL button". could you integrate this functionality, so that the smart thermostat sends the temperature measured by the…
-
Allow heating of rooms that don't have a tado device installed.
I have some radiators without a TRV. Would be good to be able to heat them up i.e: turn on the boiler with the thermostat, but turn off all the other radiators that have tado Smart TRVs.
-
IFTTT open window detection
Hi, Today the open window detection relies on a sudden temperature change I assume. It would be much better if it could be kicked off by IFTTT. That way, anyone with a Z-Wave or Zigbee alarm system could send an alert to Tado to trigger open window and stop it when the window is closed. Would also be great if if could work…
-
Ampliar el número máximo de habitaciones controladas por un controlador
Veo interesante poder controlar más de 10 instancias con un controlador. En mi caso, tengo 10 cabezales termostáticos, una por habitación, y si instalo un cabezal adicional en un dormitorio distingo no podré controlarlo.
-
Summer Mode: Open/close your windows during Summer notifications
It would be great if during Summer you could get notifications to open your windows when the outside temperature is lower than the indoor. And to close your windows when outside is warmer than inside (or predicted to be soon). This is currently not easy to do with Apple Home automation or Apple Shortcuts so it could be a…
-
Princess Air Conditioner
Please make the Smart AC Control compatible with Princess Smart AC 9000
-
"open window detection" online when heating is on...
during the summer i still get (lots) of "open window detected" notifications. but the heating is not on... would be great to only get this notification when energy can be saved
-
physical child lock to prevent removing tado knob from radiator
My 11 months old son is removing the smart radiator knob from the radiator (likewise how I would change the batteries). This opens the valve of the radiator completely and he can burn himself to the radiator. Please design knobs in such way that they can't be opened and removed that easily. Thanks
-
Make the hot water schedule "smarter"
After returning home from holiday to find there is no hot water, I'm a little disappointed at how Tado deals with the "Smart Schedule" for hot water. I have a standard indirect hot water cylinder and have Tado set to top it up in the morning and in the evening. I recently went on holiday for a few days and returned home in…
-
Power failure notification
Send a notification or an email if tado accessories lost connection which may mean a power failure (for example while you are in holiday, allowing to ask a reset to a friend).
-
Single graph to show when heating was called
I have an interesting situation where according to my gas meter I'm using gas during the night, however there's no simple way to see which room is causing this to be triggered without looking at each graph in turn. Can we have a single graph which shows when heating was called for each room please.
-
Turn on radiator valve for maintenance
Not sure if this is already implemented but I couldn't find it. It would be nice if we can open the radiator valves for maintenance even if the temperature is way above 25º. I needed to manually open all the radiator valves for maintenance.
-
aircon control should be battery powered as per thermostats
I am disappointed that the aircon control needs continuous mains power and not battery as per thermostats
-
Varios termostatos y varias válvulas termostáticas
Buenos días.yo ya tengo en dos viviendas los termostatos y cabezales termostaáticos Mi duda es la siguiente.Tengo un hotel con tres zonas gobernadas por bombas y termostatos independientes .Quiero montar Todo cableado.Mi duda es la siguiente: *Quiero poner en cada habitación una válvula termostáticamente .Puedo hacer q…
-
Summer/Winter Mode
The app should have a summer mode which, once activated, amends all schedules down by a predetermined amount, to counter ambient temperatures. For example, 22 degrees in winter feels comfortable, whereas 22 degrees in summer feels too hot. This is due to ambient temperatures, which affect heat retention. Now that temps…
-
New gas meter in Energy IQ
In Energy IQ add the possibility to start meter readings back at zero after installation of a new gas meter. At the moment you have to delete your complete history before starting back at zero.
-
[Bug][App][Android] Toolbar behind statusbar
I'd like to report a visual bug in the tado app. I'm an android software engineer myself, so here is the technical bug report: The top of the climate comfort activity/fragment (page) is partly hidden behind the status bar, so either the windowInsets are incorrect, or the toolbar is missing the top padding with the size of…
-
[Bug][App][Android] Incorrect airco vertical swing icon
When selecting the vertical swing for my airconditioning, it shows me the wrong icon for mid-down. It's the same as mid. The screen after does show the correct icon for that setting. Screenshot: https://photos.app.goo.gl/kQB2HnjwytG8utQN6
-
Improve wireless temperature sensor clip
The clip that attaches the unit to the wall mount (backplate) does not hold the unit in place well enough. Even when taking the unit out of the original packaging the clip didn't hold the backplate and the sensor device together. It's only a 1/4mm half spherical bump and doesn't seat strongly enough. I reported this to…
-
Display on/off on home screen
It would be good if we can see which radiator is on or off without having to click into the room.
-
Comfort Zone - Change comfort temperature display
I find 20 degrees too hot for “comfort” and prefer to be able to adjust when it shows as orange and when it’s too cold or hot for ME. Comfort zone is a known Zone, not absolute and different for different people, what is hot for one person might be cold for another. Our comfort temperature changes in response to the…
-
Unlock SRT manually
Would it be possible to allow a feature (that can be activated or not) to manually unlock the SRT using a 3 digit “code”. You could configure a code in the app and then input it using the SRT, turning it up and down in a certain sequence (like for safe) to input the code to unlock it when you don’t have your phone.
-
Master temperature
I’d love it if there was a way to have a unified master temperature. It’s always baffled me why you would not have the option to set the temperature of the rooms/thermostat and then just alter the on off times.
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)
-
Bring back Modulation (OpenTherm) to their wireless thermostat (UK)
Currently only the wired version supports modulation (OpenTherm) where as the wireless version in the UK ONLY does not support modulation. The EU version does. I think Tado should bring the EU version features to the UK product. It's essential for energy saving and would add more competition to the market and make Tado…
-
Hot water control when away
At present if your geolocation setting is set to away then the hot water status can either be on (constantly) or off. This does not work well if you have a regular heating pattern for water (say 3 times a day) and you are out during one time period which stops the heating cycle. It would be better to give an option to…
-
Option to submit meter readings using ft3
I have quite an old gas meter and the display works in ft3. Is there a way, or can there be a way to use ft3 for readings in the Tado app?