-
Wiring Advice
Evening and thanks for taking the time to read. Family members house has an oil boiler (no hot water) controller with an ancient analog time clock (this is all located outside in a shed). It has finally stopped working (time clock broken completely). As a replacement they are swapping the time clock control for a tado…
-
Internet Bridge off at the exact same time every day
Have had tado for a year or so and in general it has been reliable enough. But this week something has changed. This has happened 3 days in a row now, the internet bridge loses its connection to the router and isn’t capable of reconnecting automatically. Always at 6:40pm. I have sky fibre using a sky hub router. I use…
-
Setting up with Worcester Greenstar 28i Junior Combi mkV
I have my internet bridge, wireless temperature sensor and app working. If I decommission the old wireless sensor does the Tado temp sensor just take over? I’m assuming not, how do I sync it with the boiler?
-
Can the app control the smart TRVs?
I have an old standard boiler and separate hot water cylinder system (Y system) with a W/B Greenstar 18Ri. Can the smart phone app remotely and automatically control the settings on the individual Smart TRVs - so, for example, during the day the bedroom TRVs can be turned down to 15°C, but in the morning and late evening…
-
ATAG Q-Series Q38S - zonal Floor heating + hot water tank control
Hello, I am trying to find out if TADO can zonally control my floor heating system? My floor heating is setup to be controlled this way but is not currently Whole house is either on or off via a wired thermostat. I also would like to know if the TADO can control the time schedule on the attached hot water tank? The ATAG…
-
25 Degree Limitiation
Hi, i have already found several threads/comments on twitter about this but no definitive answer. Is it planned to remove this idiotic restriction some time soon? I will not have a thermostat decide how warm i can turn my house. I know about the Temp Offset "hack" and that some "digital Boiler" requires this but that…
-
Why Use Zones And The Smart Thermostat?
Having tried to read up on zones and the features of Tado, its my understand that there are a lot of overlapping features to try and cover a number of potentially scenarios but I’m struggling to work out which one best suits me. I have a smart thermostat when I bought the starter kit. We were having work done on the house…
-
Radiator valve not fitting
Hi all, I've tried all parts but nothing seems to fit. I’ve installed 4 other tado s with no issue so it’s quiet frustrating. any tips ?
-
Old radiator valve
hi all, ive tried all different set ups for this valve but nothing seems to work. any ideas how to fix this
-
SRT powers off when mounted
Hi all, I’ve fitted my tado system this morning and all seemed to be going well, but one of the rad values is playing up. It pairs no issue, but as soon as I go to mount it, the body appears to power off. It’s like pressure on the battery compartment turns it off. No response from the dial etc. I've tried swapping…
-
The email address is already used for another home
I left an office "home" we created for our office to join my own home for my apartment. I get the error "The email address is already used for another home." even tho I have left the last home I was in. When I log on to the app or webpage, it asks me to "set things up" and create a new home, but then gives me the error…
-
SORT IT OUT TADO!!!
Once again heating has shown it is off but come home to find the boiler fully fired up and heating rooms that are TRV controlled, app shows they are off!!! Either sort the software problem or get some kind of range extender as many are asking for!!!! What the point in having a remote system that doesn’t work remotely!!!…
-
Valve offSet setting via API goes wrong
Hi, since few hours (I don't know how long) the valve offSet setting via API has been in error. This is the error: "{"errors":[{"code":"celsius.or.fahrenheit","title":"Property [celsius] of class [class com.tado.publicapi.TemperatureDifferenceCommand] with value [null] does not pass custom validation"}]}" Any ideas?
-
Un-asked temporary high temperature schedule
I have had 3 times now where one of my values was suddently temporarily set to a much higher temporary value. Today I discovered my office was heated to 24degrees, when I have it, right now, permenantly set at 15 degrees. One time, I could say it was something like a 'pocket call', but three times worries me... Has anyone…
-
arabiandate reviews
Online dating is among the most famous methods to meet a new partner. Single men and women, if you are searching for love or partner, wish to begin dating, or keep it regular, then ArabianDate.com is the best dating platform for you. For more information visit: arabiandate reviews
-
2 Heating zones in one house query.
Hi all We currently have a Smart Thermostat, probably 4 years old now, connected to a Bridge plugged into the wireless router and all has worked with no issues all connected into a house with a single thermostat source controlling the gas boiler. We are due to move to a new build house in December and of course i am…
-
No heating demand
Just had my boiler serviced, and since then the Tado system is not demanding any central heating. I have an extension kit, smart thermostat and several smart radiator thermostats. Light on extension kit is pulsing. Tried re-pairing the extension kit. Tried switching extension kit, and Internet bridge off and on again. App…
-
CH, under floor heating and HW
Hi, I need some advice on the best setup for my new Tado system, which I’m going to install later this week. My current system has three components, the main central heating (CH) all on standard radiator, Under floor heating (water) in the extension and hot water. From reading other posts I think I understand that Tado can…
-
Heat Pump remote monitoring
Can Tado remote monitor your Heat Pump.? Does it connect to a data bus connector and read sensor data etc?
-
Manual (Temporary) Temperature Zone Adjustment - Via App
I appreciate that I can change the section (within the App) from "until you resume schedule" to "until the next time block", it's the fact that in the previous App version, it used to keep the users previous selection. Personally, I tend to use the "until the next time block" to advance the heating and hardly use the…
-
Replace Danfoss9000 with tado - including HWC
Hello, I'm struggling for some time now to figure out if tado° V3 supports hot water control. I have hot water pump & heating in my apartment. Heating itself is a black-box to me. But I have three wires at my home connected to current Danfoss9000 1 - input 230V 2 - Heating control 3 - hot water pump control I can't seem to…
-
Temp heating higher than set
Temp set at 19 but heating to 21 why
-
Wireless underfloor
Hi Is wireless underfloor heating compatibility currently being developed by tado at all or is it ruled out? My upstairs is tado controlled but my downstairs is currently wireless underfloor and I do not want to upgrade to a different smart heating company.
-
Why tado° asks for local network access?
As above. What's the purpose?
-
Underfloor heating in kitchen and hall.
Hi Experts I have tado all over my house except my underfloor heating in kitchen and hall room. I now have a Alltech wireless (Does not work great). But my questian is - Can I just change this with a wireless receiver and set up a wireless thermostat in the kichen and in the hall ? Looking forward to yourt replies ;-)
-
Tado and hybrid heat pumps
Does anyone have any experience with Tado and hybrid heat pumps? I have a Tado system including radiator TRV and thinking about a hydrid heat pump as part of a large extension project. My concern is that it’s introducing a new variable that Tado might not optimally work with. The idea with a hybrid system is that when heat…
-
Boiler keeps coming on for a couple of minutes
My boiler keeps coming on late evening after all the scheduling is finished at 10pm. It firers up for a couple of minutes and then turns off, but still shows 66 degrees on our ideal boiler display not 00 (it says that when turned off) Radiators are not getting warm and water tank isn’t scheduled to come on till the next…
-
Wired thermostat switching on after upgrade to ios 15.0.2
Hi, After upgrading as above on my iPhone 11 my wired thermostat has started the boiler and pump around 3pm every day, even though my schedule is set at ‘Off’ at this time. I think there has been a Tado update recently too. Tried deleting and adding the schedule again, but still doesn’t help. The only way I can stop it is…
-
Smart TRVs and main SMART thermostat
I am keen to know how these work together; ie. which one takes precedent. Lets say the temp in my hall (where the SMART thermostat is) is higher than the thermostat is set at - ie. boiler is not on. In one room the temperature is lower than than the temp setting on the radiator SMART TRV - will the boiler come on?…
-
Entire house heats up when Tado Radiator Therm comes on
I recently set up Tado in the hope that I’d save money and would have greater control over how and when areas of the house are heated. I’m not convinced it’s worth it, or I’m missing something obvious. Set up: 1 x Tado Room Thermostat 3 x Tado Radiator Thermostats All of radiators (except 1) have TRVs When the Room…