-
since fitting my Tado system my boiler appears have a cycle of 'hunting'
The boiler is new having been installed about a year ago a Worcester greenline si. Should i be worried?
-
I keep being told to contact Tado, but no method as to how?
I have moved in to a house with Tado fitted. I have set up an account, and the previous owners have given my email address access to their account. But every attempt to actually set things up end with the message that I need to contact Tado. But I have yet to find anywhere on the website any hint as to how I actually do…
-
When single room should be heated in multiroom setup Tado doesn't.
Hi all, We've got a multiroom setup with about 6 rooms that have Tado Radiator thermostats (bedrooms, bathroom, etc.). The living room has a Tado radiator thermostat and a normal Tado thermostat which are configured to the same room (on/off system). It all seems to work well, until the living room is the only room that…
-
boiler hunting since fitting Tado system
My tado system system is causing my Worcester Greenline boiler to make hunting sound as if it maybe struggling. The boiler was new and instsled about a year ago.
-
I would like to use Tado to control my heating
I have Panasonic model WH-SXF12D9E8 air to water heat pump. It heats boiler water for use and it heats the underfloor heating and radiators in two floors. Each floor has its own wall unit where you can set the temperature. I am asking what is the best way to incorporate Tado and what products I need. Would I need to just…
-
Balancing Rads
Should I open up the non thermostatic valves on the rads with the tado thermostats? Previously they were balanced so some valves were partially closed to get water to heat all rads e evenly. ?
-
Tado app and Homekit miscommunicatie
I'm experiencing a odd thing with Tado app and Homekit, in Homekit the temperature don't reflect the info from the Tado app. If I change the temperature in Homekit it changes in Tado app correctly and for a few seconds in the Homekit also, then it goes back to the previous temperature (in Homekit). Even Siri works, in the…
-
Moving to a new flat and after tado set up help
Hi all, So i have a honeywell cm701 controller on the wall and a baxi duo tec 2 combo boiler and that's a 28GA model I see on the net someone with a the same ish controller and 2 wires in side to hard wire to the boiler. So help i need is will i be ok with a controller in hall way . i will need as well 5 rad controllers (…
-
UFH and Radiator Setup (several manifolds)
Hi all, I have a Grant oil boiler with a separate hot water tank. This then feeds 4 different circuits from what I can tell Hot water and 3 towel radiators I'd like to control the hot water via tado Is there a way to make the hot water only run when one of the other circuits has the boiler on? (I have hubitat, have used…
-
Geo fencing stopped working
Since upgrading to IOS 15 on our iPhones geo fencing doesn’t seem to work as well as it used to. Have checked all settings on family phones and they are correct. When people are all out the heating remains on
-
Control heating power through API call.
Hi Tado, Is it possible to control the heating power itself through API call or is it only possible to control the heating power indirectly by setting temperature?
-
How do I wire a separate pump to receiver unit
I bought the Tado wireless receiver to replace my Horstman 3 channel programmer (+ TRV’s & thermostat). The current 3 channels are C/H, H/W and (3) a separate pump which is on the hot water return. So at the moment I can set a separate timer for this pump. I should also add the the pump cable goes directly in to the…
-
Geofencing strange behaviour?
Recently installed basic Todo system controlling Combi boiler (Vaillant). Have not subscribed to auto-assist. Tado App installed on 2x iPhone XR running iOS 15.2. All recommended settings for accurate geofencing have been set. Single Smart Schedule set up for during the day and home and Away Temperature set to 18degC. When…
-
Can I use 2 tado thermostats, one for underfloor heating?
We are currently having building work done, including the installation of underfloor heating. Currently, our gas central heating system is running with a wired Netatmo thermostat. However, it appears this has now broken. We were going to get a second Netatmo thermostat to control the underfloor heating circuit. My question…
-
Wired or Wireless Thermostat ??.
I have installed a Wireless Receiver with 10 Wireless Radiator Thermostats which gives me independent room control. The query I have is, the old system was 2 zone plus hot water, Tado only offers 1 zone plus hot water. The existing system has 2 wired thermostats, 1 for each heating zone. The thermostats have only 2 wires,…
-
worcester bosch greenstar 30i with EasyControl Smart Thermostat
Hi All I currently have a worcester bosch greenstar 30i with EasyControl Smart Thermostat. before I press the buy button, I want to know if this all works? I'm looking at getting the wired todo thermostat and want to know is it as easy as wiring this into the EMS ? Thinking of getting the wired thermostat, but do I need…
-
Ac unit
I have been busing my tado for more than a year with no issues, last monday i installed the ac control unit from tado... Now my boiler wont heat the central heating. I have uninstalled EVERYTHING, factory reset, re-installed EVERYTHING, without the ac control unit, but still boiler does not come on to heat central heating.…
-
Extremely hot radiators
I have 12 trv,s in my house and 3 of them are unbearably hot. These are either behind wooden radiator curtains or curtains. I have set offset to +2 to combat this and temperature on to 21 to correct this. Does this sound correct? I am unclear what the climate report shows. I am assuming the top toggle button shows when…
-
Heating not working
Working from home yesterday - radiator had been working in morning, then room/house went noticeably cold in afternoon. Went into the app and it told me that the heating was not responding as expected. No Open windows etc. I have replaced both Zone valve actuators (1 Central Heating & 1 Hot Water) I can get the heating to…
-
Optimal Setup With TRV’s and Thermostats
I’ve purchased the wireless starter kit as well as smart TRV’s for every rad in the house. I placed the Wireless smart thermostat in the landing, along with a smart TRV on the rad in that "room". Everything appears to be working well, however, I'm not convinced the setup is optimal; for example, the living room has two…
-
Re: Open Window Reminder Notification
-
Weird prompt on my smart AC control
Hi, my device shows 9896 when powered on. What does it mean?
-
Send heat to TRV without heating Therm at same time
Hello all! Firstly apologies if this has been asked before. I have scoured the many threads and couldn't quite get the answer. I'm in a new build with a combi and it has 2 wired therms which I have now replaced with Tado therms. One is for upstairs, one for downstairs. I have added a TRV to the kitchen. All are working…
-
Remote access
My app says I have no remote access, my ip is virgin which has been a pain lately, it keeps rebooting but now I can’t use my tado remotely ,anybody have any ideas please
-
Startup in the morning is slowed down
In the morning, when heating starts up, i see that for 10 to 20 minutes heating on the cv is limited to about 35 degrees celsius. However the vaillant heater is set to use 70 degrees. After a variable time between 10 an 20 minutes, the heater goes in full power and heats tot 65. Is tado limiting the power of the heater at…
-
Boiler not firing sometimes, tado wired stat
If I adjust the temperature up with the app or with the wired stat, sometimes the boiler just doesn’t respond. However if I unplug the stat from its base and plug it back in again it usually fires ? Any ideas what it could be ? Few mornings now we have woken up really cold where the heating hasn’t come on .
-
Just wanted to share this
I installed tado about four weeks ago with 10 radiator valves, bridge and extension kit. My property is fairly compact with the furthest valve being about 14 metres from the bridge. However I was getting a dropout on that valve 3/4 times a day for anything up to 10 minutes at a time. I naturally thought it was due to…
-
why would this stat be calling for heat?
Another night of hotter than required house. Half an hour after the house is set to lower temperatures for night time, the dining room radiator stat was reporting it was at 22° while set at 16° but was still calling for heat. When looking at the room display it showed one squiggly line was lit. Can anyone suggest why it…
-
Adding an extension box to a wired smart thermostat
Hello, Currently I have two thermostats wired to separate heating zones. I have a S plan setup with a boiler and a separate hot water tank. Currently the boiler comes on when the HW calls at any time. I want to use the extension kit to put time controllers on the HW for the boiler to reduce when it will be switched on. The…
-
No Hot Water - Danfoss TPOne-M
Hey, all. I have logged a support request but thought this maybe quicker as I can't see it being a hard one for someone who knows what they're doing to solve! (And with Black Friday I'm sure support are going too be busy!). I have new house so hoping it's wired up in a fairly standard way?! There are two thermostats, one…