-
Swapping two Salus Wireless RT520RF thermostats connected to Samsung Heat Pump to Tado V3
Hi there, I currently have two Salus Wireless RT520RF thermostats each connected to Salus receiver in the airing cupboard. One controls the downstairs central heating, the other the upstairs central heating. The downstairs receiver is wired into the upstairs receiver which is then wired in to the Samsung heat pump…
-
A complex system
Hello! I already finished mounting the tado v3+ system, including the starter kit and 8 pcs of smart radiathor ! The conclusion is not really god ! Im nnot happy with these because i see that it isnt work Properly or…i dont knwo! If i look on the gas consumption, i will cry next month/))!!!! My boiler is ariston clad one…
-
Need urgent help with set-up! Moved in to new home
Hi, I recently moved in to a new flat and the previous owners left their Tado system. We have a bridge, smart thermostat, and an extension kit. I have successfully paired the thermostat but am unable to do so for the extension kit. We are connected to a Vaillant Eco fit pure 418 (not a combiboiler). We are facing the two…
-
Advice on what's needed for setup
We've recently bought a new house and I want to get Tado installed as our smart heating system. Currently there is: A Worcester Combi Boiler An old British gas wireless thermostat that controls the radiators in the house An hive wireless thermostat which controls the underfloor heating in the main living area I therefore…
-
Geofencing reduction
Hi we use geofencing with our tado system and are very pleased with but as we have a sick relative lives about 50 metres from us and spend an increasing amount of time there. Is there a way to reduce coverage to less than 50 metres
-
Stuck on configuration download
Hi guys, My wired thermostat for UFH has been stuck in configuration download mode (gear and arrow symbol) after I tried changing offset. Now it's stuck in this mode and I cant have any heating there. I've tried reseting device and pulling out batteries and removing device from app but nothing helps. Anyone knows solution?…
-
Schedule a boost
I am often away from home. My underfloor heating has a 24 hour thermal lag from 6 degrees to 22 degrees. I regularly forget to preheat it. Can you please add a facility to diarise a temperature boost for one or more rooms?
-
Does tado modulate the flow temperature?
Hi, I'm wondering if tado actually modulates the flow temperature when using open therm? If so, based on what? I have the tado X system, wireless thermostats and smart radiator valves in 3 separate rooms. Also, how does the automatic max flow temperature play into this? I have been playing with the setting and it seems to…
-
Hybrid Heat Pump support [Atlantic Aurea 5 R32]
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermostat. If plugwise can control the hybrid system, it should be trivial for tado to do the same thing. I would like to remove…
-
Tado Compatible Devices
Hi. I have two anthracite rads which don't look great with white tado smart thermostats. Are there any anthracite tado devices available or are there any 3rd party compatible devices available that can be added to my tado system?
-
Replacing 2 zone nest heating, and wired hot water
Hello, Looking for advice please as I can't find an existing post close to my setup. I live in a new build and need to control individual room temps. I have varying heat loss and solar gain in rooms, meaning my 2 zone setup is not precise enough. Especially in my 2 year olds room overnight which gets cold. My setup is:…
-
Misunderstanding on screwfix.co.uk - What next?
I posted the attached question to the screwfix website last week, prior to purchasing the V3+ wireless kit. I'm now trying to install the kit and when I search for the existing programmer model in the app it's telling me that the Timeguard TRT038 is not compatible. So Tado lied to me. Not only have I wasted £84.99 at…
-
Does my Smart thermostat need to be at a higher temperature than my Radiator Thermostat
Hi, A plumber installed my Tado Wireless reciever on my Boiler yesterday and also installed one of my Radiator Thermostats to show me how to do it. He did admit he had never installed a Tado system before, but he told me that for the Radiator value to come on, the Wireless Temperature Sensor should be running also, which…
-
How can I check the current time is set correctly?
I have a schedule that kicks in at 6am, but recently, even though the schedule seems to running (according to the app), at 6.30 the target temperature is still set for the pre-6am block. How can I check what time the system thinks it is, and reset it if needed?
-
Geolocation Improvement's for Mobile users W3W?
Tado like devices often get repurposed into not conventional ‘homes’, such as canal boats and Rv’s Could the home location be made dynamic either using data from the home network ( our teletonica router has a gps function)? If that is too complicated or not possible due to the hardware limitations in the internet bridge,…
-
Merged: Tado responses with a delay to commands I issue through the app.
This discussion has been merged.
-
Merged: Is the server down again?
This discussion has been merged.
-
Merged: Can't control none of my devices!
This discussion has been merged.
-
Boiler not switching off
I have had my system fitted for over 2 years (Controller, wireless thermostat and 10 valves). Up to now it has worked flawlessly. However over the last week or so the boiler will not shut down at the end of the day even though the app says every thing is off. The only way I can stop it is to switch it off at the mains. I…
-
Tado° X upgrade discount - will this be available in the UK?
I got the promotional email offering a 50% discount for existing customers to upgrade to Tadoº X. However because I'm based in the UK as much as I would like to I can't take advantage of it. Does anyone know if a similar discount will be available once Tadoº X is launched in the UK?
-
[Released] Support more than 10 rooms and 25 devices
Edit from tado°: available with tado° X Original post: Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 25 devices is not enough when you want radiator TRVs and smart thermostats in each room. also limiting the total rooms to 10…
-
IFTTT replacement - customised boost temperature and duration
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could features like this be integrated into the app then? It seems like an easy change, we can already boost, it just needs to…
-
I do not know which thermostatic pressure valve install before plug some TADO
Hello, I have a question before buying some tado devices I have a single-tube installation with bypass on each radiator, so closing one does not affect the following (photo attached). The issue is that I have noticed that there are many valve models, I need a reversible one because in some radiators the valve goes on the…
-
Does the Wired Smart Thermostat X support TPI
I am thinking of replacing the existing wires Danfoss TP5000 with tado so I can link it to Home Assistant. Does the Wired Smart Thermostat X support Time Proportional and Integral (TPI) so it limits overshoots and undershoots on meeting the required temperature and can also control the cycling of the boiler? (ErP Class IV)…
-
Night mode
Hi, I think it would be useful to have a "night mode" with a setting in temperature. With the other modes, away and home can be set as a scene recognised by alexa, Google home. So we can stop heating the apartment or some rooms when we go to sleep with third-part routines/automations.
-
energy efficiency with Tado X relay on/off vs Tado V3+ modulating/opentherm
I purchased a Tado X wired thermostat along with 12 Tado X radiator valves, assuming they would be compatible with my system in the same way as the V3+ version. However, I discovered that my Ariston boiler uses BridgeNet instead of Opentherm, and the X version isn’t compatible with my boiler’s digital interface. As a…
-
Logic Combi c30
I have a Logic Combi c30 boiler, It has a Center Wireless 7 DayProgrammable Thermostat which has a Receiver Box. Am I correct in thinking all I have to do is remove the Center Receiver Box and wire in the Tado Wireless Receiver? So just 4 wires? Is it that simple?
-
Dual Zone confusion
Hi, I've been happily using tado for many years but have moved to a new build house and have gotten lost trying to upgrade the installed system to tado. I have a system boiler (with no apparent controller), a Mixergy HW tank and 2 wired thermostats controlling a dual zone system (Upstairs and down). Seemed simple enough…
-
Moved into a house with Tado
Hi everyone, we’ve just moved into a property where the previous owner had the tado system. It’s been assigned to us and I can control the heating from the app. However we have no hot water, the ap says hot water is on but the shower is cold! How do we change this? I’m not tech savvy so it’s been a challenge already!
-
Myson Touch TS EU to Tado
Today I went and bought 5 TRVs and a Wired starter kit but seems I may have made an error so looking for some help. Currently our house has 4 Myson Touch room thermostats. We have 3 downstairs which control our underfloor heating for 3 different zones: kitchen, living room and hallway & bathroom. Upstairs is one Myson…