-
New install but wireless receiver will not pair what can I try?
I have set up the thermostat and the bridge which both work fine but the wireless receiver will not pair to the bridge, just blinks fast then goes solid but app won’t let me continue install saying it’s not paired, then error light comes on
-
Interaction between (Wireless) Smart Thermostat and SRV
HI, Just installed partial Tado system using (wireless) smart thermostat starter kit + a number of SRV (not yet all fitted). I'm trying to figure out whether I should have an SRV on the rad in the room in which I have the Smart Thermostat/Temp Sensor placed. And if so, what the role of the Smart Thermostat really ends up…
-
Tado & OVO
My daughter purchased a wireless starter kit from a chap on E-bay - unused. I installed the internet bridge, set up an account for her and tried to add it. The camera wouldn't open so we added it manually and it came up with the message "You are installing a Tado provided by OVO" When I clicked on continue the next screen…
-
Best setup advice - 2 wired thermo / 2 zone heating no seperate HW zone
I've currently got two tado wired receivers. Need to replace boiler controller so purchased Wireless starter kit, which has controller for 1 zone / HW and includes wireless thermostat and bridge. As I've only got two zones (and no separate zone for HW) can I just wire one zone into HW, controlled by wired thermostat and…
-
Comfort screen settings
Ability change the comfort range and set a min/max in the comfort toggle
-
Hot water not coming on
Hi have just installed my tado but hot water is not coming on....the app says its on but the boiler is not starting up any help will be much appreciated many thanks
-
Tado X Wireless Temperature Sensor exposed to Matter does not allow changing temperature
Hi! I noticed that exposing the wireless temperature sensor via Matter does not allow controlling a room. Two examples: 1) I have a room with 2 TRVs and a wireless temperature sensor. The idea is to have the sensor be the temperature benchmark for the room. It works in Tado app but when I am exposing the devices via Matter…
-
Adding Wired Smart Thermostat - need to factory reset... something... Help!
Hi All I'm adding a wired smart thermostat and a wireless temperature sensor to my existing system which has been in for a few years. It is to control a new under floor heating zone. I've added and removed the device a few times trying to figure out how to get the wireless temp sensor, which is in the room with UFH to call…
-
Replace therma txq0027 with tado wireless
Hi , I really need some advice please , I have boiler with hot water tank , the boiler is Ideal logic heat2 h15 new model , with controler instaled therma tqx0027 (esi) with dual heating zone (downstairs and 1 floor) , I can't figure out how to connect 9 cables with tado , on the tqx0027 are next wired 3 cable blue to N 3…
-
Remove 10 room limit
I don’t live in a castle, but I exceeded the 10 room limit. So one room could not control the boiler after adding a temperature sensor to the room. Was ok before. To get round it I had to group two rooms together. Not ideal. I don’t see why 10 is a limit. Can’t Tado increase that please.
-
ProWarm with Tado Wired Thermostat?
Looking for someone with wiring diagram knowledge to assess whether, hypothetically, the thermostat with the attached wiring diagram could used with a tado wired thermostat instead. Accepting this is out of scope of a regular tado deployment.
-
Co-ordinated Early Start
Early start is a fine idea to take some of the guesswork out of when your heating should come on each day. However, for condensing boilers and multi-zoned Tado setups, there's an efficiency issue, especially when setup with modulating/bus connection to the boiler. Specifically, even rooms with the same 'start' time, early…
-
What happened to Tado X?
All promotion of Tado X seems to have gone, previous pages now go 404, product listings have been taken down - what happened?
-
Heat Pump Optimizer - hot water heating only once a day during cheapest hour
My hot water boiler usually only needs to be heated once a day, thanks to its good insulation. However, the current hot water optimizer heats the water during a set period, which isn’t always efficient. Although you can adjust the heating duration, it might not align with the cheapest energy hour if it’s preset in the…
-
3 Channel Programmer
Most U.K homes use a 3 Channel Programmer. Would you like Tado to develop one?
-
Battery last changed
Hi - Please can you add a feature which records when the battery was last changed? Thanks
-
EMS Bus wiring
Looking for wiring connections and setup for Worcester Greenstar CDi Classic to enable control using the EMS Bus (If possible) I have it connected using contacts at the moment. Thanks in anticipation Phil Holmes
-
Monitoring of status of my boiler
I already successfully install TADO technology into my heating system including hot water preparation. Heart of the system is gas boiler – Immergas Victrix Zeus Superior 25. Boiler is connected with Tado via Wireless Receiver (WR). WR is able to switch boiler ON/OFF. I am not able to monitor status of boiler via Tado…
-
All off function
Does anyone have an issue with the “turn off all rooms” function not working correctly? Randomly it fails to turn off all the rads even though everything shows as off in the app. The heating light on the receiver remains on and a random radiator or two is still blasting away. Tado are currently investigating for me and we…
-
Wall Tado thermostat
Hi just a quick question. If I fit trv’s to all my radiators including the lounge. Am I right in saying I wouldn’t need the Tado wall thermostat and is it a case of just disconnecting the hard wire to the boiler from the thermostat?
-
Moved into New House with Tado - how to connect to extension kit?
I have spent 2-3 hours on piecing everything together on moving in today and think I am nearly there. The house has a Tado thermostat, internet bridge and extension kit. The boiler is an Ideal Icos He12 which I believe is a 'combi' boiler. I have downloaded the app and registered my thermostat and internet bridge device,…
-
Energy IQ
Does anyone know if the data on this is anywhere near accurate? My boiler heats my hot water as well as the radiators but the app doesn’t show anything for hot water usage. Is the total usage in the app just the rads or does it take the total usage including hot water heating and just allocate it across the rads?
-
Which Room is Requesting Heat
Tado is full of so many great functions it's hard to debug your setup when fine tuning your settings. It would ge great to see a page that shows which rooms (that are assigned to the boiler) are actually requesting heat - knowing what the system is doing and not assuming what is occurring. This would support my efforts in…
-
Internet Bridge, can one be ordered?
Does anyone know how to contact Tado directly? I have lost the internet Bridge device due to our internet engineers sorting out my internet. It been a couple of months now and I decided yesterday late last night to turn my heating on. The Tado app said im offline so checked….no Bridge device.
-
Vaillant ecotec plus and ebus
Hi there. I've recently had a Vaillant ecotec plus 835 boiler fitted. I've also just bought a tado v3+ wireless starter kit. Just going through the installation instructions on the app and it says to wire the wireless receiver to 24v=RT on the boiler. Is this correct as I thought it should be wired to - /+bus for boiler…
-
Where do I put these wires?
I have replaced an ESI today with a wired tado but have got it wrong as fuse has blown at boiler spur.. Where do these go on a Tado? ESI brown was in live Blue was in neutral Black was in N/O Any help appreciated. Thanks
-
Disappearing Zones after pairing receiver for hot water
Hi all, My setup that I am upgrading to tado is 2 heating zones and 1 hot water, where: Zone 1 Heating spans two floors: ground floor and first floor, controlled with Danfoss TP5000 (just a timed thermostat) Zone 2 Heating spans top floor: second floor, controlled with another Danfoss TP5000 Hot water: controlled with a…
-
EcoForest Heat Pump Controller
Hi, we have a new EcoForest ecoAIR+3-12 Pro Heat Pump being installed and I was looking to see if anyone had any success using it with the Tado Heat Pump Optimiser? We already have a full suit of Tado’s installed for our congenital system but as it doesn’t say it is supported on the Tado website I just wondered if anyone…
-
How much does the energy price affect your energy consumption?
UK domestic gas consumption in 2022 reduced 15% compared to the previous five years (2017-2021). The downwards trend continued in 2023 and reduced 21%. Statistically, the 2011-23 CORRELATION of UK domestic gas consumption with PRICE is -0.61 (strong). The CORRELATION with annual TEMPERATURE (CET) is -0.88 (very strong). Q.…
-
In what steps can the radiator valve regulate heat? And for the thermostat?
So what I'd like to know: In what states can the radiator valves be? Is it fully open, half open, closed? Or are there different options What do the three wavy lines mean? Do they correspond to the valve states or to the required power from the heater? I'm trying to better understand how tado works to optimize my own…