-
Tado V3+ with Smart TRV's used with Tado V2 - are they compatible?
I am looking to upgrade my Tado V2 extension kit to the V3+ version, but I have a load of smart TRV's that I use with my current V2 extension kit. Would these TRV's be compatible with V3+ or do I need to buy new ones? Thanks in advance.
-
How long SHOULD a flow temp take to come up?
im gojng to seem thick again here. My combi boiler (without hot water tank) is rated to 24Ki have about 9 rads most are smaller but three bigs ones in three rooms with high ceilings that I know take about 90 mins to come up 2 degrees to temperature. My boiler flow temp after setback starts off at about 30 deg and in 15…
-
Radiator Thermostats
I have a house that has Tado TRV on all the radiators and thermostats in each of the major rooms to allow better temperature control. However recently I have found that the app shows rooms are heating despite temperatures being higher than requested. Initially, I thought it was an error and checked the radiator and it was…
-
Why is my system coming on?
In the last week the control unit has decided to turn around midnight even though no programmes are active. This sets the pump running but the boiler doesn’t fire because nothing has been requested but the smart thermostat.
-
Connections
Can anyone tell me if the wireless receiver connection HW NO should only have 240v when there is demand from the software?? Tech support won't answer this simple question...
-
How do wired thermostat and Tvr work together
I have a wired thermostat and was thinking of getting the radiator valves to go in other rooms. My question is, if the wired thermostat is not calling for heat as in off but the radiator valve want heat does the boiler come on and just heat that room. Or does the room thermostat have to be calling for heat for the radiator…
-
EU wireless receiver Opentherm not working
Just replaced my UK wireless receiver with EU version to get Opentherm... all wired as per boiler and Tado instructions and all looking OK on the Tado app, however when Tado called for heat the boiler didn't fire up! After much "googling" and head scratching I finally contacted Tado support (who were quick to respond btw)…
-
Sticking Tado room t/stat.
The t/stat repeatedly sticks on so the boiler is on all the time. Been advised by support to reset the bridge (so problem is known about although nothing on search). This works sometimes but not others so situation is such that I've replaced Tado t/stat with a manual t/stat which is of course very reliable. Very peed off…
-
Batterien
:s Ich habe ständig die Fehlermeldung mit den Batterien! Habe mehrmals die Kontakte gereinigt!!
-
Wireless receiver connections
I am getting a little desperate waiting for Tado to respond to my issue and wondered if any has experienced the problem. The output of my new receiver HW NO is permanently live, irrespective of the demand (can't switch off), tried everything, checked the S Plan wiring and it is correct, strange that the heating works fine…
-
V2 Tado upgrade to opentherm
I have a V2 currently wired to my boiler. However, the boiler needs to be replaced (Combi). I will be getting a boiler with opentherm option. Can I use the EU wireless receiver with my V2 on opentherm. Thanks
-
TRV on constant heat
Hi, I'm currently away for work, but my wife changed the batteries in one of the TRV's the other day. Since then, the radiator has been on constant heat. It is connected to the internet bridge, as I can see the updated heating chart, but changing the temperature manually on the valve or the app does nothing. I got her to…
-
Difference between models of SRV . . .
Does anyone know the difference between the Smart Radiator Thermostat V3+ Basic for Multi-Room Control @ £59.99 and the Add-on Smart Radiator Thermostat @ £74.99 ? I note the display on the V3+ is a bit altered from the original version but it seems a huge price difference for two devices which so far as I can see do…
-
Immergas Victrix tera 24 plus
Hello, I have Immegas Victrix tera 24 plus and I want to conenct it by eBus with Smart Thermostat V3+. If I tried it (I use + and -), Immergas didn't turn on (boiler has same port for relay and bus). Can you help me please?
-
We have dual zone heating using individual room TRV’s but hot water is not working
So yesterday we installed individual TRV’ on all radiators. So they work as individual zones (Tado sorted this). the hot water doesn’t seem to be working original set up was heating zone thermostat upstairs. Heating zone thermostat downstairs. And hot water via 1 timer controller anyone shed any light on how we get the hot…
-
Radiator balancing
1) Any thermometer suggestions for balancing radiators.? 2) Once you have smart TRVs is balancing still needed as they will regulate flow from the front end rather than the outlet from the rear end of the rad? cheers
-
Wrong reading
Hi, new to Tado. Only installed the smart TRV’s yesterday. I checked the app this morning and it said that one of my child’s radiators had almost 10kw output over night. And all other rooms had 0 output. That’s definitely not right. Is there any reason for this? Have I set it up wrong?
-
Tado TRV external temperature sensor - Home Assistant
I have recently bought TRV's for my house and I am not happy temperatures I am getting on the TRV's its not not accurate and offset isn't helping me. The only possible solution is an external temperature sensor but these are priced at £89.99 each!!!! too expensive and I will be returning my Tado system back for a refund if…
-
Manual Control Timer not working
I have just installed TADO TRV's and have been into the app and under settigns/rooms & devises/ under each room selected timer for the manual control. I have tested this and oddly this only seems to be working in 1 room, all the others are not timing out can anyone help
-
Boiler still firing after thermostat has reached its temperature
I have a wireless thermostat but have noticed in the last week or so that when the required temperature has been reached our boiler is still firing up. Obviously this is causing us to use more gas than normal, so expensive! The boiler is pretty much firing up all day but the house still feels quite cold. We've got it set…
-
Non thermostat radiators staying on
I recently installed three radiator valves and the wall thermostat all great. All the rest of the radiators except for three (two bathroom towel rails and one in an airing cupboard) have standard thermostats, and are set to be off. Following the instructions the existing Honeywell control has been set for heating to…
-
Pin Extenders - 20mm tip to thread
Hi, I'm trying to install a Smart Thermostatic Valve but I keep getting error E4. My TRV is a Siemens M28x1.5, I'm using the right adapter, however, the distance between the tip of the pin and the beginning of the valve thread is 20mm so I guess I need a different pin extender that is not included in the box, right? or am…
-
Help wiring Tado V3+ receiver from EMT2
Hey folks! I’m trying to wire up the V3+ receiver in place of my current ancient Scottish Gas EMT2 receiver and separate thermostat. My issue is that I’m not sure which wires should correspond to the ones on the Tado receiver. Additionally, when I tried to decommission the thermostat I found that my boiler would not fire…
-
Smart thermostat sensor acting weird
Hi I have a smart thermostat in my house and for some reason it only fluctuates on 20 degrees. When the heating is working it goes up to 20.8 and when it is not even for a couple of hours it goes down to 20.6. I checked the actual temperature with other devices and it fluctuates by +/- 3 degrees. I have a wide wardrobe…
-
How do I become a TADO installer
Hi, I'm trying to find out how to become a tado installer, is there a link or form to fill out? I've been an electrician for 35 years and spent the last 22 years working on heating systems including designing control systems. Thanks in advance Ian
-
How can I see which rooms were heated at certain time?
Hi, I would like to have an overall view of heated rooms per minute. I can see it per room but I need to check all the rooms one by one to see which rooms were heated at certain moment. I find this information interesting to modify the schedule of rooms if needed to have the heating system run less frequently. I couldn't…
-
Moved house - hot water tank.
Hi, at my last address the heating and hot water were supplied by a combi boiler. I used the wireless starter kit and 5 smart radiator valves. We've recently moved and this place has a condensing Worcester green star boiler and separate hot water tank controlled by a wired in thermostat. Radiators in each room (some of the…
-
Aansluiting Receiver op stadsverwarming
Beste helpdesk, Ik heb een probleem met het installeren van mijn Tado starter kit V3 Situatie: stadsverwarming amsterdam ->AquaHeat Tado starter kit v3 -Tado Bridge is gepaard (aangesloten op router) -Tado temp sensor gepaard en Geplakt op wand in woonkamer -Tado Receiver gepaard (in meterkast) Hoe aansluiten op…
-
Strange TRV behaviour
My bedroom, controlled by a trv was working perfectly until ten days ago, but not since. It's scheduled to come at 22 degrees for a few hours in the morning, drop to 16 all day and then 22 before bedtime, dropping to 14 overnight. The rad has started to come back on through the day even though the trv shows no switching…
-
Wireless thermostat not cooling the radiator
I have wireless thermostat in the living room and Radiator thermostat on other rooms. Living room rads still hot even when I have set wireless to lower temp. Eg 23 in room set to 18. There is one room in the house where I have set the temp to 21 24hr. Any ideas why?