-
Radiator thermostats with Smart AC in one room
I have Radiator thermostats in all rooms, but I also have air conditioning in all rooms and would like to add Smart AC control units from Tado. Before I purchase them. Would it work to use Temperature reading from Smart AC control unit for Radiator thermostats? So I do not need to add one more unit if I want a temperature…
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Hot water controls not working Baxi Boiler
Hi, I have a Baxi Duo-Tec Compact+ 1.24 GA boiler. Per the advice from Tado, I replaced my existing wired thermostat with a Tado Wired Thermostat V3 (EU purchased). Radiators work great. The Radiator head I added to a back room calls for heat appropriately. However, I have no hot water. The system shows hot water on but…
-
App keeps crashing and removing all devices -help
Recently had tado system installed , no radiator values. At least once every 24hrs the app removes all the devices and we have to reinstall?? This is on two mobile phones one android and one apple. Anyone else had/having the same problem? any suggested solutions ?
-
Reset TADO v2
Hi how i reset a tado v2? i tried to touch with two finger the arrow but nothin appened bye
-
Rechargeable batteries that work in Tado TRVs
Probably useful to have a thread here with good/bad experiences of rechargeable batteries in the TRVs Tado recommend Panasonic Eneloop 1900mAh as their physical dimensions closely match standard AA batteries In two of my TRVs, I am using Energizer Recharge 2000mAh (all silver colour) batteries with no issues I've also…
-
TRV tear down . . .
iFixit has published a tado° TRV tear down guide, it’s very easy to undertake and by chance I have a unit which has developed a fault; the motor seems to be partially jammed so I’m keen to try and free it. However, although the guide states the circuit board is held in with two cross head screws these are in fact very…
-
Can I replace my grasslin towerchron qe1 and towerstat rs with tado
I'm based in Waterfotd
-
Use one thermostat to override all system
Hi, It would be good to set one ST or TRV or whatever that when overriding the programmed schedule through its interface (not from the app), it will override the whole system to the specified temperature.
-
Intervals dans progamming
HI, I think we should be able to get interval from monday to thursday for we not need to program every day individually. Because weekend begins when we finísh our worktime and we change our habits
-
More than 10 rooms - help please - pre sales question
Hi Tado Community, I’m hoping someone in the community can help as Tado themselves just copy & paste information from their web articles which doesn’t answer what I need to actually do or if it will work. I’ve used Tado for years now and have been very happy with the system. Let me summarise my current setup and what I’m…
-
Help!!!
I have 2 Honeywell wired thermostats. I have a boiler and a water tank too. One thermostat is downstairs the other is upstairs. I have a tado smart I want to install with the internet bridge. Can I swap both Honeywell’s for tado smart thermostats and connect them via one internet bridge and then control them via the same…
-
Lowest sepoint temp is 16 degrees
On my Mitsubishi AC can i set the setpoint as low as 5 degrees. In Tado app the lowest setpoint is 16 degrees. Make it possible to have lower setpoint in Tado then 16 degrees!
-
Battery to be replaced on TRV
Hello, I have Tado TRVs in my house since 2 months ago, more or less. Periodically... let me say once a week, I receive the notification of one couple of batteries to be replaced in one room.... then in another room... etc. Every time it is a matter of waiting some hours and the notification disappear. batteries are FULLY…
-
Minimum battery voltage requirement
I have 2 radiator thermostats that nag me for new batteries every few months, while all the other stats are happy for the best part of a year or more. A new dry cell battery is 1.5 volts. The 2 nagging stats want new batteries when there batteries are 1.3 volts. I had thought about fitting rechargeable batteries, but their…
-
Add another heating source to the app
Hi, I’ve recently installed Tado kit in my house on all the radiators. The house itself is quite old and we live in a village that has no gas, so we must use heating oil (kerosene). This is delivered periodically into a storage tank that has a maximum capacity of 1400 litres. It would be great if we had a unit of measure…
-
Advice before buying
Hello, I have a dual zone system but (due to issues with the central controller) it was merged into one zone with regard to timings. This is the controller, it used to have HTG1, HTG2 and Water - HTG2 was amalgamated with HTG1 at some point in the past and the cable that went upstairs was disconnected at both ends.…
-
Where To Start - Got Rad Stats, Wireless Stat and Programmer Thing
Hi All, Apologies if this has been asked before, but there's so many bits I need to put together in my head, it was getting confusing looking as so many individual results. Wifey bought 7 radiator thermostats, a wireless smart thermostat and a wired receiver box thing-a-majig. My task this week is to make it all work.…
-
Pre-sale tech question - but how?
Hi, I've some questions I'd like to ask Tado before I buy. I can't find any way of contacting Tado though. Chat is unsuitable (and offline) no phone number; help centre doesn't help you top contact Tado. Not even a mailing address. This is weird.... and very off-putting. Am I missing something really obvious? Evan
-
I can't undo radiator valves
Is anyone else having a nightmare separating the two parts of the radiator valves to change the batteries? I saw a video saying to press upwards on the bottom and twist the main part anti-clockwise but nothing happens. There's no movement at all. I've been in contact with support for over a week and they keep asking for…
-
Directly select room on the Graph page, without navigating away
Please could a drop down to select each room be included on the graph screen in the App? This would allow quicker comparison of how different rooms have behaved, without having to navigate away to a different room and then selecting the charts again and again. I find the graphs of each room very useful, but find it…
-
Greenstar 8000 EMS compatibility
Please develop EMS compatibility with Worcester Bosch Greenstar 8000 range to permit proper modulation control.
-
Assign more than 10 spaces to the zone controller
Our house has 14 rooms, 20 smart radiator thermostats and one smart thermostat. We want to be able to set the temperature individually in all 14 rooms. Can Tado adjust the zone controller so that we can, say, control 15 rooms instead of just 10? I suspect it's an setting somewhere, which should be adaptable, right?…
-
CH Not triggering Boiler - started today.
OK This may be another version of other peoples questions on here, but I wanted to ask as my setup seems slightly different. I have had my entire setup for almost 3 years, working fine, this just started happening today. My setup consists of a Wired Thermostat, and 7 TRVs. No Hot Water Extension. My system (non-Tado)…
-
Exaclty what Tado smart valves do - & other pre-sale tech queries.
Hi, Struggling to find out what the Tado system can do - poor website info and a lack of customer support does not bode well. What I want to do is operate each room as its own zone. So I can set different temperatures at different times of day for each room. This means I can get the bedroom warmed up to n° in the morning,…
-
Meer dan 10 ruimtes aansluiten op de zoneregelaar
Ons huis heeft 14 ruimtes, 20 slimme radiatorknoppen en één slimme thermostaat. We willen in alle 14 ruimtes de temperatuur individueel kunnen instellen. Kan Tado de zoneregelaar zo aanpassen dat we, zeg, 15 ruimtes kunnen besturen in plaats van slechts 10? Ik vermoed dat het ergens een instelling is. Die toch moeten…
-
Pay to use basic functionality like Open Window detection?
This is making me seriously furious! I have just installed the Tado Thermstats and when I check in the app I find that you have to have a PAYED account for the Open Window functionality to work properly which was a promised feature when I bought the devices! This is simply not acceptable and I really hope that this will be…
-
Poss to default to rad off if TRV loses connection ?
My kitchen TRVs has a poor connection due to a few walls between it and the bridge. And it keeps demanding heat if it was on when it loses connection. I have 7x rads with TRVs and 3x rads without and 1x thermostat, so it's too hot at night when this happens. Can we make it so that when a TRV loses connection it switches…
-
My Tado TRV fault
MyTRV will not activate the motor Only see the display temp change no fault codes showing. Recently installed was working fine.
-
Tado app says heating? When heating is set below temperature
Hi, I've got a strange one when I'm on the TAsdo app on my phone. It says its heating though the temp is set lower than the temp in the house? I have attached images. Hope someone can help? Thanks