-
What components do I need to make my Tado system fully smart?
I recent bought Tado Smart TRV starter + 4 smart TRVs. These work fine, in that I can schedule when they open the TRV and at what temperature. Mine is a single non-Zoned heating system, that still uses a manual Potterton EP3000 scheduler and an attached Honeywell "dial" thermostat to provide overall control of the boiler…
-
Travelling to a different time zone
The radiators in my shop are controlled by Tado via the App on my phone. I am going to travel to a different time zone this winter; so the clock on my phone will change to a different time. I have set up starting up and shutting down times as a program on my App for the heating. What time will this correspond to? The time…
-
Termostato Cablato non da il segnale di accensione e spegnimento alla caldaia.
Buongiorno a tutti. Premetto che ho già un sistema tado con termostato cablato e valvole in un appartamento secondario. Il problema ce l'ho nel mio appartamento Primario. Ho installato solo il Termostato Cablato e Internet Bridge. Tutto il sistema funziona. Se alzo la temperatura dal telefono si alza nel termostato e se…
-
Help needed with Worcester Bosch Greenstar 32CDi Compact
Hi, I've been using tado since March 2015 on a WB Greenstar R30 HE Plus (the tado replacing a TR2 wired thermostat). My old boiler died in early January 2022 and I've had it replaced with a Greenstar 32CDi Compact combi - no programmer or timer as I was expecting the tado to work. Unfortunately, I can't get the tado…
-
Home Assistant sync with Tado app delayed
I installed the Tado integration into my Home Assistant platform and it works quite well. One single problem: when I set my Tado thermovalves from HomeAssistant, the Tado app will update immediately, fine. But when I set the same Tado thermovalves from the Tado app, HomeAssistant will update after a few minutes, probably 5…
-
Make it easier to see which room is requesting heat by adding a symbol/colour to room Icon
I have a few rooms with smart TRVs and it always takes me a while to find which room is requesting heat. It would be easier if there is a little logo, or maybe a coloured border around the room icon if it is being heated.
-
User access to selected rooms only
Hi, Is it possible to give a user access to selected rooms only? Eg the kids only for their room and the living room? Or an au pair only for her room and the shared bathroom for example?
-
Automating Home/Away process
Apologies if this has been raised before but I couldn’t find a reference. When setting the system to “Away” provide an option to revert to “Home” either by setting a future date (preferred option) or at least by giving the number of days user will be away. This would save user forgetting or if out of internet connection…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Tado X and Vaillant VRC 720 --> not compatible?
I read that the smart thermostat X is able to communicate with most boilers (including my brand, Vaillant) using openTherm. My thermostat (VRC720) has opentherm, so I figured that would work out great. I purchase 5 valves, a border router and a smart thermostat. Setting up the border router was very buggy, but with some…
-
Panasonic 8/10 degrees mode missing
After a lot of reading about the AC controller, I was falsely mislead to believe that I’d be able to control ALL the features/buttons from my old Panasonic heat pump - but no - apparently Tado do not support such simple thing as modes. I have a vacation home where I need to be able to set an away mode, and when I’m there I…
-
Help bridging a wired thermostat
I have been using Tado with a wired thermostat and the wireless receiver for a while. Yesterday, I got myself TRVs and installed them, but when they call for heat, the boiler doesn’t fire up. I have been looking at other threads, and from what I can see, I need to bridge the wired thermostat so that the receiver takes…
-
The Tado internet bridge drastically slows down my internet connection
Hello, I've bought the Tado Smart Thermostat – Starter Kit V3+ and a Tado Smart Valve, however, if I have my internet bridge plugged in, my internet speed drops. I have a 900MB/s (DL) to 300MB/s (UP) fibre connection. If the bridge is unplugged, my speed and latency is stable at 3ms, but when I connect the bridge for just…
-
App Failure
Hi, this morning the app failed to show any thermostat devices and seems to be useless. This is after a mail was sent confirming the offline schedule had been activated. Any clues, don’t want to delete the app and start again. Sherman
-
Merged: Multiple homes
This discussion has been merged.
-
Merged: Manage multiple homes through one Tado app
This discussion has been merged.
-
Merged: Multiple homes
This discussion has been merged.
-
Merged: how to add a second (and 3th) home with Tado to my app
This discussion has been merged.
-
Merged: Second home problem
This discussion has been merged.
-
Add Second Home (Multihome) - September 2022
Hi, when is the option being added to the app so we can control a second home. I find it surprising and to be honest, disgusting that this is not already a feature. I can see 3 years of complaints and an Admin person stating in April that it just keeps falling off the to do list.
-
Baxi cannot be turned off via the power off button
Hello, My boiler, Baxi Luna Duo-tec 1.24 E, is controlled via OpenTherm using the tado wired thermostat. Heating and DHW control works fine. I noticed that when I connected the thermostat via OpenTherm basically the boiler cannot be controlled via the HW buttons located on the front which is okay and expected, however also…
-
Tado with Viessmann 100-W
I have a mixed tado system (three zones with wired stats, trvs, strvs, and a wireless stat) that works well with my ancient Worcester Bosch boiler. The Megaflo hot water cylinder is heated via a timer switch on a fourth zone. I have no idea what controls the temperature of the DHW. I adjust the boiler temperature from time…
-
One tado out of battery, but the rest not stable anymore.
Curious to see if others have the same experience: I have one room with a tado knob being out of battery. I know, I should have replaced them; there was enough time, but I didn't. I had that before: when one room is out of batteries, the rest starts to be unstable. I have total outages, I have weird mis-readings of higher…
-
Central Heating not switching on via Tado (hot water ok)
Hi all, I'm looking for some help. I've installed tado wireless, thermostat, receiver and bridge. All connected. App speaking to thermostat and receiver and switching on/off hot water, boiler fires up. However with central heating the light goes on (receiver) when i increase temperature to switch on heating but it doesn't…
-
Humidity accuracy
How accurate do you think the humidity sensor is? My spare bedroom, with good airflow, no mould and at room temperature reached a humidity level of 71% whilst my bathroom, which I had showered in shortly before, only reached 67% even with the shower on. I feel like the sensors are pretty far off.
-
language for android
Hello, please add language settings for Android in the app
-
Internet dropping out
When my internet connection drops, which it does regularly, my boiler appears to be left firing at full force - so in house the temperature rises to apprx 25 degrees unchecked by any thermostat. If i am our of the house this csn mean hours of overheating whichbis dangerous for pets. When at home, until i can get the…
-
How to add tado when heating is controlled via manual time lock on boiler
Hi everyone , I’m looking for help - we control my current heating system ( Worcester green star) using the time clock on the boiler - we simply switch it on for a few hours on nights and use the manual trvs to only heat the rooms we wantt etc. w rush ally use our log burner as our main heat. We DO NOT have a room stat or…
-
Grant Vortex Kerosene Boiler Powers Rads, Ariston Nuos Plus Heat Pump Powers Potable
I moved into a pre-owned house in March. My previous house I equipped with Tago V3 TRVs, a control panel for the boiler and several wireless thermostats which I adored. I want that level of control back. So, I've been exploring the new home systems. It's a two energy source system. The first, potable heat pump water heater…
-
Homekit wouldn't recognise Tado
Hello, I have Tado for the last 8 years. It is a solid reliable system that works perfectly. I have added it before to apple home app (Homekit) before whilst trialling it with no issues. I have now sat up all my home in Homekit but It wouldn't recognise the internet bridge anymore! I made sure that my wireless network is…