-
extend matter over thread functionality of the X thermostatic valve
Great device, and it connects flawlessly with the thread network on my home assistant. So well that I now have fitted them in all the house. Ahead of the competition. There are a few functions I am missing though: I do not get to see the battery level over matter, nor the option for a firmware update (which might be…
-
Worcester greenstar 8000
I have recently wired up the tado V3+ to my boiler but it's not controlling it. Do I need to disconnect the existing RF receiver?
-
Upgrading from V3+ to X issue
Here's hoping you can help with my issue. I'm a long time user (9 years) and have recently used the upgrade offer to change to X. I've purchased the wireless receiver and thermostat kit and 8 trv's. AFAIK the receiver works as a thread border router and so I don't need the bridge X The receiver is wired to the boiler using…
-
Hot water away setting
Can anybody confirm what the toggle switch on Hot Water setting in Away mode means? I'm guessing it means if switch is on, the hot water will continue in same settings as Home. If off, hot water set to constantly off. Is this correct?
-
Tado X and leaving my Drayton LP522 hot water programmer in place
Hi all, I am upgrading to Tado X starter kit with a wireless thermostat including hot water controller (just arrived), I am currently on Tado V3+ with only the wired thermostat and some room stats. I have a Vaillant Ecofit pure 425 boiler with a tank, vented system, it has a Drayton LP522 programmer for the water. so my…
-
Tado x Thermostat - Set the MAX temp
Hi, I need (so fast as possible) the ability to lock (via software) the thermostat X or to set the max temp so that people cannot set the temperature above the set threshold. Urgent!!
-
Zone controller by definition off
In the current softwareversion all installed thermostats get the same zone controller after installing a wall thermostat. This should not happen by default. Can't this be changed by making this a configuration part of the initial installation when a wall thermostat is added to the system, where the user gets the option to…
-
Does the increased boiler firing/stop cycles prematurely age the boiler?
Hi, Does the increased boiler firing/stop cycles prematurely age the boiler? I believe that a boiler, and it's constituent parts, have an MTBF that cumulatively set an MTBF for the boiler in terms of number of firing cycles (affected by lots of other factors, to be sure) but nevertheless, doesn't the TADO controller…
-
Tado API Documentation
Hi Team, I’m currently working on integrating Tado into a project and was wondering if you could share the API documentation or guide me to where I can access it. Any additional resources or tips for developers would also be greatly appreciated. Thank you in advance for your assistance! Best regards, Andrii Tymofieiev
-
2 Zone Heating with Combi Boilder
Hi All ! I am recently moved to a new build, which has a combi boiler. There are 2 heating zones, one on ground floor, and the other one on the first floor. I want to put Smart Ratidators to control heating for each radiator individually. I am newbiee here… don't know lot of stuff. Can someone help me with all stuff I need…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…
-
Exclude some zones from auto away
Is it possible to exclude certain zones so that they don't shutdown when I'm away? I don't mean buy forcing manual mode because I'd like to preserve the different setpoints through the day
-
Merged: Include a full calendar plan
This discussion has been merged.
-
Ifttt replacement with Google Home
Every evening when we go to bed we call a Google Home Routines that sets all the temperature settings to 15 degree in all the rooms. I want to have a warm house the next morning. For this reason I had a IFTTT routine scheduled at 01:00 am with the task "all rooms will be controlled by tado° again". Is it possible to have…
-
Multizone - UK new build
Hi there, We have moved in to a new build in the UK and I'm looking for help with setting up tado and if I have the current correct kit. We currently have 2 wired thermostats which control each zone independently so that one can be one and the other off and I would like the tado to mimic the same (we have a combi boiler…
-
Strange change in heat demand of UFH
Hi, I wish to share rather strange behaviour of thermostat controlling UFH. Here is an example of how heating looked like before changes made with Tado support: And here is how it looks for last few days after some algorithms correction made by support: Despite what's on the chart - UFH valve/pump isn't turned on all the…
-
I have no heating or hot water as the system does not seem to be communicating with the boiler. Help
I moved into a new house that has underfloor heating downstairs on a Polypipe system but upstairs has 3 radiators (1 in each bedroom) with smart radiator thermostats, a smart thermostat on the landing and an Extension Kit in the cupboard with the cold water tank. The Internet Bridge is plugged into a BT Home Hub. The…
-
Is hot water schedule maintained even when smart thermostat battery is discharged?
Hi all, Our hot water schedule was linked to the smart thermostat. I have misplaced the smart thermostat and cannot find it and its battery has discharged. Hot water is now "offline" in Tado app and I dont see it come on on the wireless receiver at scheduled time. I still get hot water in shower/taps but its just warm even…
-
Set max temp for manual
There is currently a feature for auto stopping manual overrides on radiator valves but there is no option to set the max temperature allowed. My kids keep turning up the temperature to max. Can you consider adding a max temperature setting.
-
Installing Wireless thermostat kit v3+ on a Vaillant EcoTec Pro24 Boiler with SALUS Controller
Disclaimer: I am not an engineer, nor am I particularly skilled in anything plumbing or electrical. Essentially I'm layman with everything to do with boilers. I do however have a basic understanding of electronics, and I do like taking things part and solving an interesting problem Recently, I bought the Tado Wireless Kit…
-
Can Intergas Kombi Kompakt HRE work with Tado X
Hi, I bought an tado x introduction package (bridge, thermostat and knobs). I have an older intergas boiler. I only saw after it came in that Tado recommends the v3 for Intergas. But does it still work with Tado X (but maybe limited?)
-
Tado - Bosch olio condens 3000f
Hi all I have a Bosch Olio Condens 3000 boiler. I have just purchased a Tado v3+ to replace my existing netemamo thermostat. I am having trouble with the receiver part that is wired into the boiler. I have watched YouTube videos on the installation and it suggests that I wire the receiver into the boiler via the 230v live…
-
Tado Wifi enabled Hot Water Cylinder Temperature Thermostat Display & Controller
As far as I can understand, if you do not have a smart (oil or gas) boiler or a boiler that can separately control and heat only your hot water you are limited to the control and heating of your hot water cylinder by timer schedules only. However a timer schedule cannot detect if you already have enough supply or hot…
-
Two buildings, two thermostats, one boiler
I have one boiler (gas combi - Baxi 800) serving two buildings right next to each other. One is a shepherds hut the other a garden room. The boiler is in the garden room with the heating to radiators laid onto the SH and the GR. I have separated the heating by having two zone valves installed (one for each building). I…
-
Tado Extension Kit - convert from high to low voltage (ebus) setup
Hi - I have a Valiant ecoTEC 615 with a Honeywell ST9400C controller, with an S-plan system. My end goal is a system that supports modulation. I've bought a Tado v3 Wireless Smart Thermostat Programmer with Hot Water Control. But, I've read here that this won't support eBUS from the Valiant boiler, and I'd have relay…
-
Central heating won't turn on unless the hot water is on
Hi there! I've just installed a starter kit in my home. It has an old school hot water tank with a simple two way motorised valve (DVA 2/5). The system works fine if the hot water is set to "on", but if it isn't on we get no heating. I had assumed the purple loop wire served the purpose of connecting the central heating to…
-
My hot water is now not showing in the app
Hi since reinstalling the app, can't see my hot water control. I have been communicating with customer support but haven't had any instructions on how to sort it. All my rooms are showing on the app. I've had this since 2019 and haven't changed anything in the house. I'm having to go and move the valve to get hot water and…
-
Moved: Geolocatie per kamer per gsm toestel. Nuttig voor thuiswerkers of oudere kinderen in het hui…
This discussion has been moved.
-
Boiler wont turn off
I've had the Tado a couple of weeks now and everything has been going fine. At 9pm yesterday the boiler kicked in and hasn't stopped since. I've turned everything off, I've tried resetting the boiler but nothing is working. I'm stumped. Anyone got any ideas?
-
How to get support from Tado?
I have now for 5 days tried to get solved a problem regarding the my Tado Thermostat is Offline. I dont think I have evere got such a bad support service as from Tado support. The make a new proposal for how to solve the problem every day, but not chance to have a direct contact. What are people doing to get good support.…