-
Please search for your request before opening a new thread.
Dear Community Members, This part of the forum is intended to help us track the features that you, our customers, are interested in. We understand that you, as members of our forum, tend to represent more experienced users, often with in-depth knowledge of not only tado°, but similar products and services as well. We feel…
-
[Released] Develop a "basic backup schedule" mode for when Tado outage or loss of internet
EDIT [15. 01.25]: Offline Scheedule can be requested by community members here Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property, the Smart Radiator Valves effectively stick in their current…
-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Support multiple schedule configurations such as spring etc..
It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not. It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch…
-
Multi Home Support
I would like to use tado in my main house and in my vacation home. Currently this is only possible by using one account through the app and the other account using the web-app. I would like to have both available in the same account.
-
Individual Geofence Option
Hi. Not sure if this has been mentioned before, but would be great if you could set-up individual Geofencing capability for each individual Smart Radiator Thermostat. To explain, I am often away from home for several days at a time for work and would like to be able to automatically detect this and shut off the Radiator…
-
[Released] Child lock
tado EDIT 16.02.2021: Child lock should now be available in your app / my.tado.com You can activate the feature by going to settings, rooms/devices and then clicking on individual Smart Radiators to activate the child lock mode. You can read more about the feature here:…
-
[Released – ver. 5.10] Manual Control of Home and Away mode
Sometimes if I’m travelling home, I’d like to be able to manually turn my heating back to home mode, so that my rooms heat up At the moment I have to manually set a temperature for each room in order to warm my house, and can’t select Home mode until I’m within my home zone
-
[Released] Copy and Paste schedules
tado° edit 2: With the new app release of today (oct 25th) roughly half of our customers will start seeing this feature in the app. This update was based on suggestions of the community (you), interviews our development team have conducted and the feedback from you might have noticed when exiting the Smart Schedule. The…
-
[Released] Launch an external temperature sensor for the Smart Radiator Thermostats
I'm very happy with Tado overall, apart from the performance of the Tado Smart Radiator Thermostats. I’m finding that due to the way the Tado Smart Radiator Thermostats work, they heat up a room very, very slowly, and sometimes fail to get a room anywhere near the desired temperature. I've noticed that after they turn on…
-
[Released] How to turn off my boiler with thermostat and valves? (Global On/Off)
[Admin Edit:] This feature is currently in beta in our Web App, please find more information and leave your feedback for us in this poll: https://community.tado.com/en-gb/discussion/8248/user-feedback-request-quick-actions-formerly-global-on-off#latest Original: I have 6 valves and 1 thermostat + extension. If I am at…
-
Reduce the comfort temperature range to 18-21°c
In the uk a room set for the comfort range of over 20°c can far exceed a comfortable temperature. I would suggest reducing this so my app doesn't think my house is cold all the time
-
Release a smaller, cheaper Wireless Temperature Sensor for the Smart Radiator Thermostats
The recently released "Tado Wireless Temperature Sensor" is essential, in many scenarios, to have accurate operation of the Tado Smart Radiator Thermostats. Which, due to their proximity to the radiator, are not typically able to measure the actual room temperature themselves. However, many find the price (£69.99 / 79,99€)…
-
Preventing radiator valves from getting stuck
I have replaced my heating control system with Tado smart vales on all radiators. On my previous system there was a feature that opened and closed all TRVs at a fixed time once a week irrespective of any heating schedule in operation. This operation did not take more than a minute or two. This meant that valves not used…
-
show battery charge level as a percentage
Please show the battery charge level as a percentage or even better show a graph of the battery charge level over time; this will provide much better info on anticipating when batteries need to be changed.
-
Notification when device looses connectivity
Please make so the app gives you a notification if one of the devices looses connection.
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
[Released] Show the climate report in browser on tado.com
In the app on my iPhone I can see the heating history which is great, but I don't understand why I can't see this when I access my tado account on tado.com using a browser running on my desktop computer.
-
[Released] Rechargeable batteries in Smart Radiator Thermostats VA02 hardware revision
tado EDIT 10.02.2021: We have released support for Eneloop 1900 NiMh rechargeable batteries for the VA02 hardware revision of the Smart Radiator Thermostats. - Why only Eneloop 1900 ? Because other rechargeable batteries might be too thick to fit into the battery compartiment because they are thicker than Alkaline…
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
[Released with tado° X] Make the Smart Radiator Valves quieter
I find the Tado Smart Radiator Valves are too noisy for use in bedrooms. The motor noise when opening/closing the valve is loud enough to disturb sleep. I have had to set my bedroom schedule in a way that ensures the bedroom heating will never turn on when we could be asleep, and so have to manually turn it on everytime I…
-
[Released – ver. 6.1] Allow changing the order of tiles/rooms
Please allow us to change order of tiles in the v3+ app; in the pre-v3+ app we used to be able to change the order of the room stripes.
-
show humidity on room tile
Why do I have to go into a room to see the humidity? There’s enough space on each room tile to add the humidity figure.
-
Show the flame icon on the Tado thermostat display when the boiler is running
Very useful to have at a glance if the boiler is running without having access to the boiler display. This is standard in almost all the thermostats.
-
Disable TRV "calibration" when offset is changed [required for using external sensor]
As you may have read elsewhere on this forum, myself and other Tado users have been working on ways to make Tado TRVs more usable by using cheaper external sensor to read the actual room temperature and dinamically update the temperature offset of the valves with great results. The only drawback of that is that we have to…
-
Merged: Smart Radiator summer / maintenance / bleeding mode (leaving the radiator open)
This discussion has been merged.
-
Keep public roadmap up to date
Tado publishes a public roadmap here which is commendable for a heating technology company, but expected for a disruptive tech company. However, the rate of updates to the roadmap is particularly low, with the last update provided many many months ago: 31-08-2018. It would be excellent if the roadmap could be updated on a…
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Samsung Smartthings
Hey How do i get Tado radiator to work with Samsung Smartthings - I tried both smartthings app(classic) but no luck :(
-
Data export
Please allow download of chart data for each room. This would be most useful as a CSV file. Data available should include date/time, actual room temp, demand temp (what the heating has been set to), humidity, open window detection, etc. I would like to be able to analyse my own data, and be able to make easier comparisons…
-
Modify Limits of Room Temperature Control
Is it possible to modify the upper limit of the Heating Temperature in the Smart Thermostat (it is currently restricted to 25 degrees Centigrade)?